-
-
Horn&corn replied to the thread In field tub grinder.Just realised you’re in Wiltshire. I’ll clear the straw for you and won’t even charge you. What a generous gesture 👍 -
Horn&corn replied to the thread In field tub grinder.Local chap uses stripper header in barley as works really well. Can go earlier as don’t take straw into combine. Leave straw attached to...
-
I suspect you'd need 1000hp to get any amount done in bone dry windows before drilling.
-
Jcb 538-60 22reg 3500hr lost 4x4. Not working on brakes or switch. Fuse ok. Where next to look?
-
Don’t want to pee on your corn flakes but id rather sh!t in my hands and clap than have another 3 ram Albutt
-
Horn&corn replied to the thread Shear grab.I’ll take plenty of pics and say after I’ve repaired and sold it 👍🤣
-
Horn&corn replied to the thread Shear grab.First grab was redrock and lasted years but would just snap kv tines towards the end so wasn’t economic to continue. New grab on hardox...
-
Horn&corn replied to the thread Shear grab.Got one in stock?
-
Prodig or Albutt. Sharpen the blades and grease weekly. Our silage is packed well but we only need a 70 lpm hydraulic pump on the...
-
Horn&corn replied to the thread Shear grab.Yep ours is sharp and greased taking full grabs. I think we’ll try albutt next time but they’re fair expensive if only last couple of...
-
Horn&corn replied to the thread Stoll loader brackets to fit NH TM/Case MXM.There’s 2 different widths of loader available. You’ll need to check which you have. New brackets weren’t too expensive when we swapped
-
Horn&corn replied to the thread Disc v Powerharrow for organic.If your soil is forgiving enough for the vaderstad to work then stick with it. If it’s more challenging then you’ll need a powerharrow...
-
Any recommendations on new grab. We thought we’d bought the strongest and we can still break this. Pivots ripped out, pins snapping...
-
My 40 is at Manners combine breakers up north so spares available Never caused much problem, dealer services when we did 500 acres a...
-
Horn&corn replied to the thread Massey Ferguson 40 combine.Our 38 was great but not everyone’s experience. Massey parts were incredibly expensive but we usually sourced elsewhere. Contractor now
-
-
Loading…
-
Loading…
The London Palladium event “BPR Seminar”
This is our next step following the London rally 
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
lwtheatres.co.uk
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
BPR Summit | LW Theatres
lwtheatres.co.uk