• Welcome to The Farming Forum!

    As part of this update, we have made a change to the login and registration process. If you are experiences any problems, please email [email protected] with the details so we can resolve any issues.

Recent content by Percy Veer

  1. P

    Insect Identification

    This insect fluttered down beside me the other day. It's about 2 inches long I'm curious to know what it is
  2. P

    Ford 7610 - No fuel at injectors

    Thanks everyone for trying to help. Even though the manual says pump bleeding is unnecessary this is not the case as it does require it. There is a bleed screw on the black plastic pipe on the pump. I had loosened it and tried to bleed it, but didn't seem to be getting anywhere. The mechanic...
  3. P

    Ford 7610 - No fuel at injectors

    Yes it is in the open position. Thanks I've an engineer coming tomorrow as I've other things to do. I'll post what the problem was and the remedy.
  4. P

    Ford 7610 - No fuel at injectors

    Where, what is that?
  5. P

    Ford 7610 - No fuel at injectors

    It looks similar to the black and white photo. Here's mine. It is difficult to photograph as the front-end-loader structure blocks access.
  6. P

    Ford 7610 - No fuel at injectors

    Thanks. I changed the 2 large 'O' rings and removed the old ones first. It would have leaked with an extra 'O' ring in place I shall look for the black plastic pipe. There is resistance when I move the lever on the lift pump. Fuel does flow from the bleed screw on the filter head when opened.
  7. P

    Ford 7610 - No fuel at injectors

    Thanks There is no air in the filter because when I loosen the bleed screw fuel runs out and when I operate the lift pump an extra squirt of fuel comes out there. I agree there is an airlock. I just haven't managed to find the bleed screw(s) on the pump
  8. P

    Ford 7610 - No fuel at injectors

    I changed the fuel filter on my 7610. The engine started and ran briefly afterwards. Fuel is getting to the lift pump and there is no air in the filter. Looking at the shop manual, I have a Simms Injector Pump with a self-bleeding line and it says pump bleeding for this type is unnecessary...
  9. P

    ATV Tracker Recommendation

    Can anyone recommend a Tracker device to deter theft and aid recovery? What are the must haves? Thanks
  10. P

    Fencing a square post.

    I've about 8 metres of wire netting and top wire to be strung. There's a square post in the middle, (concreted in). As it's such a short length there won't be much strain on it. If I do it in 1 length of fencing it means a 90 degree turn for the wires around the post. Can I do it with 1...
  11. P

    ATV Stolen

    My ATV was stolen last night. 2016 green Honda 4x The wiring underneath to the rear lights has been torn apart by high foliage Left rear tail light lens taped up Only done about 500 hours Essex area
  12. P

    Solar Batteries

    5.2kw GivEnergy Battery installed a year ago. Cost including installation about £3200. Like you, I already had solar panels.
  13. P

    1st Experience with Electric Car

    True. It charges at about 8 miles per hour. (Kia) However buried in the depths of the manual it says not to charge from an ordinary socket when the battery is nearly full as it can overcharge
  14. P

    Fraud?

    I've had one or two deliveries/pick-ups per week to my farm address for the last 3 weeks. The problem is it's nothing to do with me. The goods appear to be car parts. Today I had another van arrive to pick up a package. The driver gave me the contact phone number, so I rang it. The chap didn't...
Back
Top