Recent content by ryan1135

Cheers guys ive ordered some laly tines they look right see if they fit 👍

We have bought a old power harrow from an auction and need some tines any ideas on a make no plates or anything on it it’s 4m must be a 80s machine any help would be grate

Right I’ve been running a jd550 for doing a bit of hay and what not just a little bit round home but today it’s f**ked me right off wrapping in the pickup reel wouldn’t even go in to the chamber so ready for a match tonight they don’t like wet they don’t like short I have a mrs I don’t need any...

yes I believe it is is it for sale ?

I If you had a parts book please do send me a pic of the set up I need that would be brill

Hi guys I have a John Deere 550 round baler and I am after a grass kit believe it’s a knife to keep grass from wrapping round the bottom roller or at least help I can’t seem to find one wondered if any one had a old scrap baler with the kit on it or even knew what I was on about! Cheers Ryan

Are they that good ?

Looking at an old 550 round baler just for doing 100 or so silo bales Round home so don’t want any thing fancy but ideally wanted the bales chopped I’ve found a good net wrap JD550 but it didn’t have knives in it I’ve found knives online just wondering can you buy knives and put them in to or do...

I have a old 2005 krone easy cut 32 front mower without conditioner just two big top hats behind the bed that shoves the grass in to rows one of the bearings have gone on the large rear top hats and the buggers seized on the shaft tried wd40 and heat and she’s not budging has any one els been...

I know she’s an old girl and jcb wiring is never the best but intermittently loosing rear arms 4x4 and front pto not at the same time tho I guess the wires are rubbing through unless there all connected just wondered if any one else has had something similar on the old 1000 series fastrac if...

No just removed the two relief valves one had a gorse in it and was full oven pulled it out and it shut back up put it in and it was fixed sorry I can’t be more help maybe try checking pressures and seeing if it’s a pressure issue /filter pump Or valve block is surly the only things it could be

Hi what it was with mine was the valve above the back axle it has 2 relief valves in the valve block one of them was wedged partially open with a tiny gorse filter (or what was one any way) cleaned it out put it back in and was sorted could be that partially open the valve block has pipes from...

Cheers taken feed pipes off no pressure but hudrollics arms steering etc working will have to try trace them back to a pump see if it is a pump that just runs them

busy getting some late silo in and my fastrac 1135 just flashed up 1&2 warning lights and lost all brakes hold the peddle down and crack a bleed nipple on calipper and oil just runs out slowly normally shoots out like hell when I’ve done them in the past no air pressurising it but air tank is...

Do you know how to do that or is it a jcb job yes it just turns full right lock (if I swap the wiring plugs round on the hydraulic spool block it turns full left lock ) just one wire mowering all the time as soon as I start moving it throws the lock in weather I move steering wheel or not