Massey 7618 2013. Tractor is using adblue at around double the rate of usual. It has quite an easy life, sprayer etc but noticed the change when it was working harder. Anyone experienced this? Is there a cheap/easy fix before looking at a delete? Thanks.
Managed to bend a tine 🙄😂
Does anyone know of one of these on the shelf or if there is such a thing as non genuine? They can only be bought as a pair from the dealer. Thank you.
Yeah. As I said above except for a couple of little problems this MF and Agleader system has been as good as perfect for 6 years. Tattys, plooin' in the hole, everything. Credit to Philips at Forfar for setting it up.
The system has been near faultless for 6 years. Just the odd small issue. I'm sure this is an easy fix. Just need to get at the the axle sensor I think. Will probably start digging in about the back of the hub as mentioned above.
Thanks.
I had a look but couldn't see anything. Just a wire going into the axle half way along. Is the sensor inside? Does mudguard have to come off or more?
The AB line is there and is 100% in the correct place. The tractor just won't sit on the line.
I'll add that at less then 5km/h the tractor sits on or near the line but as speed increases to 10km/h the tractor moves across.
Perhaps?
The receiver is fine and hasn't moved. The problem was intermittent which would suggest it couldn't be an input unless there is a bug in the screen and an input is changing?
2016 7720 steer ready with an aftermarket Agleader Incommand on RTK.
The tractor is sitting approx 25cmm off the line always to the right. The problem was intermittent. I had this before and the problem was with the tractor rather than the Agleader system. Problem sorted out by dealer at that...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.