Forever Fendt
Member
- Location
- Derbyshire
Today at work
- Thread starter Penmoel
- Start date
Who sells priefert in the UK ,are they as good as they say.
Forever Fendt
Member
- Location
- Derbyshire
My understanding is no more coming in because of 25 percent tariff slapped on top and not eligible for grant as not Galv this is a ex demo one will try it latter on tonight I only wanted the front head gate but it could not be split so ended up with it all pleased so far
- Location
- Cirencester
Did mine year before last, I just put one in about a quarter of the way down from the top each side and it has been fine ever since, so nice not to squeak your way everywhere!!!!
Just been through mine, a few small bits still to do but pretty much there. Got fed up of crud getting between the grain tank window and cab window so have tried some expanding foam in there this year, will see how we go with that. Had the fan speed motor pack up, one walker loss monitor and a few bearings to do, and the stupidly designed de-awning plates that hinge down, have replaced them with bolt on plates on the actual concave (kit available from NH)
Steevo
Member
- Location
- Gloucestershire
Interesting idea with the expanding foam. I wondered about some foam rubber or such which might have a bit more flexibility than expanding foam which seems to set rigid but as yet haven't got round to sourcing a suitable piece.
- Location
- Cirencester
Well, I did think silicone but the gap is a tad too wide, cab and tank are rigidly fixed so guess the grain tank will flex as it fills. Still, will see if it works, wont be long till we find out!!!
- Location
- Breckland
Unusual spot this evening
B52 went around 4 times and then seemed to be dropping into Mildenhall.
B52 went around 4 times and then seemed to be dropping into Mildenhall.
never did like that place
did little more in between down pours good old British summer started to place the bearers then the Erf donated her rear end
- Location
- Worcestershire
- Location
- Yorkshire
Sir loin
Member
- Location
- North Yorkshire
you must be expecting dry weather Iam tempted to dip my toe in and cut one field tomorrow.
Iam tempted to dip my toe in and cut one field tomorrow.
- Location
- Lancashire
Last time I dipped mi toe in I nearly drowned,you must be expecting dry weather
- Location
- Lancashire
Cant get bloody sheep dry let alone grass
AndrewB
Member
- Location
- Kincardineshire
What a stupid place to put a battery!!
- Location
- Yorkshire
- Location
- Yorkshire
I've only cut 9 this afternoon got another 12 to do tomorrow then one Wednesdayyou must be expecting dry weather
- Location
- Moreton-in-Marsh, Glos
Where have you put the foam?
Round the outside of the window or between the roof and the tank front?