Today at work

[Forever Fendt]

Only wanted a head gate

 

[thom]

Only wanted a head gate

Who sells priefert in the UK ,are they as good as they say.

 

[Forever Fendt]

Who sells priefert in the UK ,are they as good as they say.

My understanding is no more coming in because of 25 percent tariff slapped on top and not eligible for grant as not Galv this is a ex demo one will try it latter on tonight I only wanted the front head gate but it could not be split so ended up with it all pleased so far

 

[MrNoo]

Been doing today what NH should have done at their Combine factory. Fitting grease nipples to the rear stub axles on our CX 6080. I know that @MrNoo and @CotswoldFarmer1977 have had the same problem. Namely that when you turn the steering wheel, the most bloodcurdling noise emanates from the back end.

Did mine year before last, I just put one in about a quarter of the way down from the top each side and it has been fine ever since, so nice not to squeak your way everywhere!!!!
Just been through mine, a few small bits still to do but pretty much there. Got fed up of crud getting between the grain tank window and cab window so have tried some expanding foam in there this year, will see how we go with that. Had the fan speed motor pack up, one walker loss monitor and a few bearings to do, and the stupidly designed de-awning plates that hinge down, have replaced them with bolt on plates on the actual concave (kit available from NH)

 

[Steevo]

Did mine year before last, I just put one in about a quarter of the way down from the top each side and it has been fine ever since, so nice not to squeak your way everywhere!!!!
Just been through mine, a few small bits still to do but pretty much there. Got fed up of crud getting between the grain tank window and cab window so have tried some expanding foam in there this year, will see how we go with that. Had the fan speed motor pack up, one walker loss monitor and a few bearings to do, and the stupidly designed de-awning plates that hinge down, have replaced them with bolt on plates on the actual concave (kit available from NH)

Interesting idea with the expanding foam. I wondered about some foam rubber or such which might have a bit more flexibility than expanding foam which seems to set rigid but as yet haven't got round to sourcing a suitable piece.

 

[MrNoo]

Interesting idea with the expanding foam. I wondered about some foam rubber or such which might have a bit more flexibility than expanding foam which seems to set rigid but as yet haven't got round to sourcing a suitable piece.

Well, I did think silicone but the gap is a tad too wide, cab and tank are rigidly fixed so guess the grain tank will flex as it fills. Still, will see if it works, wont be long till we find out!!!

 

[Breckland Boy]

Unusual spot this evening
B52 went around 4 times and then seemed to be dropping into Mildenhall.

 

[roscoe erf]

Unusual spot this evening
B52 went around 4 times and then seemed to be dropping into Mildenhall.

never did like that place

 

[roscoe erf]

did little more in between down pours good old British summer started to place the bearers then the Erf donated her rear end

 

[Agriimark]

 

[Robert K]

Busy day of bits and pieces

Started off strimming gateways
Then replaced a mirror arm and glass on the magnum
And stripped the light of the hedge cutter for straightening

 

[Fendt516profi]

 

[Sir loin]

you must be expecting dry weather Iam tempted to dip my toe in and cut one field tomorrow.

 

[Gator]

you must be expecting dry weather Iam tempted to dip my toe in and cut one field tomorrow.

Last time I dipped mi toe in I nearly drowned,

 

[Gator]

Cant get bloody sheep dry let alone grass

 

[AndrewB]

What a stupid place to put a battery!!

 

[Fendt516profi]

 

[Fendt516profi]

you must be expecting dry weather Iam tempted to dip my toe in and cut one field tomorrow.

I've only cut 9 this afternoon got another 12 to do tomorrow then one Wednesday

 

[Robert K]

Rain tomorrow chaps

 

[Two Tone]

Well, I did think silicone but the gap is a tad too wide, cab and tank are rigidly fixed so guess the grain tank will flex as it fills. Still, will see if it works, wont be long till we find out!!!

Where have you put the foam?
Round the outside of the window or between the roof and the tank front?