hi. we have a trimble 250 on patch antenna and a 500 on the more accurate white antenna. however the 500 will not pick up signal. both are on the same sats [120aoe] but the 250 is working fine. im thinking maybe the antenna or cable has some problem. would anyone have any thoughts? thanks
trimble ez quide 500 no signal
- Thread starter turbokid
- Start date
- Location
- Kimbolton
Hi there, if you swap the Patch antenna from the 250 onto the 500 and you see satellites then its defiantly the co-axial or the receiver.
I'd then replace the co-axial 1st as this is much cheaper that the reciever
I'd then replace the co-axial 1st as this is much cheaper that the reciever
just thinking, would it be ok to just replace this antenna with the cheaper patch?really all it does is lime spreading but the 500 has an ez steer.
- Location
- Kimbolton
It would do no harm, it just does't perform as well
- Location
- Kimbolton
We might have something 2nd hand or a patch if you need one
yes i would be very grateful if u could help. thank u
- Location
- Kimbolton
Just give us a call on 01480 861824 option 3 or e-mail [email protected]