This was getting a bit greedy.
18ft Bailey with rear bale bumper.
Bales more than 4ft.
18ft Bailey with rear bale bumper.
Bales more than 4ft.
No time to waste if @Hfd Cattle sees bales in field...................This was getting a bit greedy.
18ft Bailey with rear bale bumper.
Bales more than 4ft.
View attachment 1086811
I run a 26ft marshall on 6 welgers and they just squeeze in nicely (not too tight) so the bales dont move about. Il admit the bales the wife bales are more consistent than mineWe run a 28ft for 6 Welgers on the bottom, usually have about 12-18" spare, so really need about 26.5 -27 for six.
A real 4ft is pretty small, most are 4 and a half feet.
Yup we just do 5 on the bottom and 4 on top as we're not going far.
21ft is a good size for mobility unless your really tight for space.
Just see what is available secondhand I wouldn't buy new at the moment....
What are your specs? I know I how you feel I'm always struggling to give secondhand equipment to meet my requirements I must be awkward or something or everyone else is on a much larger scale .There is no second hand bale trailers available in the spec I want
Just out of interest how much more straw do you get out of a 5'6ft bale?Not really relevant to the original post, but the last few years we have done six 5'6 bales out of a V660 on a 33ft bed with an angled rear rail.
View attachment 1086854
34ft on new trailer to be sure.
View attachment 1086856
For me a 23ft double axle sprung drawbarWhat are your specs? I know I how you feel I'm always struggling to give secondhand equipment to meet my requirements I must be awkward or something or everyone else is on a much larger scale .
I hired a Marshall 28ft a few times before I got lucky and picked up a used Bailey.View attachment 1086864View attachment 1086865View attachment 1086867
28 foot Marshall on bogies, BUT flotation radials NOT super single tyres
Drawbar is sprung (same design as brougham, but Marshall locate the spring behind the bulkhead so it doesn't get covered in mud that turns into grinding paste)
The tyres make a huge difference to soil compaction and road comfort. This Marshall is far nicer to pull on the road than sprung axle heron/pf/Marshall on super singles, plus the flotations barely mark wet ground that super singles would wreck
Length wise 26 foot is just enough for 6 haylage bales from McHale/Kuhn soft centre baler. Straw needs another foot longer unless they're from a solid centre baler with a good operator. I bought the extra length 28 foot because it was rated for more weight and came standard with the extremely comfortable sprung drawbar
Take it that's an older Bailey the sides now are folded plate with slotted holes cut in for the hooks to go into.I hired a Marshall 28ft a few times before I got lucky and picked up a used Bailey.
The Marshall towed lovely, couldn't fault it at all, bogies at back and sprung at front, hooks(heavy duty 5/8") in the right places at an angle the strap doesn't fall off when strapping yourself. Good trailer.
The Bailey I have is probably better painted and finished but doesn't pull quite so well somehow, and the hooks are in the wrong place (because it's all made of box section you have to use the hooks) It's on springs with mini super singles so maybe that's the difference.
To the OP go for double axle, it's a no brainer, I'd spec that on the smallest of bale trailers.
As others have said baler makes a massive difference
View attachment 1086925
These are "4ft" roller baler claas bales on our 26ft Marshall
View attachment 1086926
While these are 4ft fixed chamber krone bales on the same trailer, both loads out of the same field
And they don't just fall apart and fill the passageway of the calf shedI'll bet there's more stuff in the (smaller) krone bales as well !!!
My 22ft Keith rose bale trailer is a single commercial axle 10 ton rated. I always assumed it was 10t load not 10t total, was I wrong? That's like 50 straw bales or 25 heavy hay bales or 14 silage bales... Which I think it's quite the load...Just feel like pointing something very obvious out here but there keeps being mention of single or tandem axle. Working on 9 ton axle load by the time you take trailer weight off that wtf could you carry weight wise on a possible 24ft+ trailer with one axle. You won't get a manufacturer to make a single axle trailer at that length anyway i wouldn't think certainly not if you tell them its intended use.
I'd price a new one before buying one of them. I've a 2021 trailer just like the second one in that ad, and though I understand the new ones have gone up, that's quite a bit more than I paid.