Search results

Hi ive a bobcat 553 with a split hydraulic pump was just useing it as normal when it suddenly stopped functioning so i stopped it to see a huge pool of oil i thought id just blown a hose under the cab but on further inspection the gear pump was split not thinking much of it i ordered another...

Hi ive a problem with tls on a 6620 john deere ive no error codes but its as if its dead it does nothing doesnt jack up on start or anything could it be the position sensor or would i get a warning light if this was the problem? Thanks in advance

I wondered if anyone can shed any light on a problem i have with the intermittent wiper setting on my 6430 it sets off then stops then moves a little then stops and so on fine on the other two settings except when i switch it off it wont return to base just stops wherever its at. So my thoughts...

Can anyone tell me what the symptoms of a bad valve is? My 6430 is sharp on the shuttle but ok on the foot pedal. If i fether the foot pedal in really slowly i can feel the tractor juddering as if its grabbing slightly was thinking of changeing the valve as ive had it calibrated which did help...

Hi does anyone know if its possible to calibrate the forward and reverse packs on 6430 premium i cant find any info in the book about it seems more jumpy than normal so wondered if there was a procedure thanks in advance

Anyone made a machinery purchase recently and had any finance quotes was wondering what the going rate is at the moment

Anyone any idea what the new price of the f5500 is now

Anyone know the future of lely branded products like the lely welger balers ect i know they have been took over by agco was thinking of changeing the welger but dont know weather to buy anothef if they stop badgeing them as lely welger might make more sense to buy a mf

Whats peoples thoughts on the best bearings available gonna do a bit of work on the baler this winter and replace a lot of bearings

Whats peoples thoughts on the best bearings available gonna do a bit of work on the baler this winter and replace a lot of bearings

Anyone got one and what they think

Can anyone tell me how to recalibrate my hcs on 6430p seems to be bottomed out all the time

Im getting the code ecu157.04 on the 6430 when i switch the ignition on in a morning any ideas? Once i get her started it seems fine all day

Does anyone know of a supplier for a aftermarket panhard rod for 30 series john deere part number AL174143 genuine jd £297.22

Wheres the best inline tyre supplier for tractor tyres was looking to re tred a tractor on 600 65 38 rears and 540 65 24 fronts thanks in advance

Hi anyone know how big a job to fit new injectors to our 64 is it something i can do myself or do i need dealer to set them up with computer? Think i have a issue tractor is running rough at idle thanks in advance

I cant say ive noticed untill today but i drove a friends 6930p and the gearbox was so easy where as on my 6430p its fairly stiff / notchy is there any linkages i could oil or cables or are they just like this

Hi has anyone ever had a clutch fail on a 30 series jd our 6430 when reversing up a steep bank this afternoon started squealing a little bit and the transmission was defiantly slipping is there a way of adjustment with these oil clutches thanks in advance

Hi anyone know if i put a 30 micron or 10 micron fuel filter on a 6430 i have both for some reason

Hi whats peoples thoughts on different oil brands? I have priced q8 rock oil exol and shell all same spec but price difference is massive always used q8 but its deerest this time exol cheepest