Intermittent wiper problem john deere

I wondered if anyone can shed any light on a problem i have with the intermittent wiper setting on my 6430 it sets off then stops then moves a little then stops and so on fine on the other two settings except when i switch it off it wont return to base just stops wherever its at. So my thoughts were the wiper motor was fecked so ordered a new one and fitted it still no different so i took the stalk out in the dash and used a tester and all seems good then i tried a different relay but still no different when i use my tester at the motor end and switch it on i get power then it cuts out then more power then cuts out again probably does this 3-4 times to get across the window im confused
 
I wondered if anyone can shed any light on a problem i have with the intermittent wiper setting on my 6430 it sets off then stops then moves a little then stops and so on fine on the other two settings except when i switch it off it wont return to base just stops wherever its at. So my thoughts were the wiper motor was fecked so ordered a new one and fitted it still no different so i took the stalk out in the dash and used a tester and all seems good then i tried a different relay but still no different when i use my tester at the motor end and switch it on i get power then it cuts out then more power then cuts out again probably does this 3-4 times to get across the window im confused
Hi,got the same problem with my 6930 for the last 18 months,swapped motor off another 6930,no good,swapped stalk as well,still no good,asked dealer about it,and they’ve never had one do it before,so been using her without it,normal and fast working fine
 
Hi,got the same problem with my 6930 for the last 18 months,swapped motor off another 6930,no good,swapped stalk as well,still no good,asked dealer about it,and they’ve never had one do it before,so been using her without it,normal and fast working fine

Yea my normal and fast work ok as well. Does yours stop anywhere on window when you switch it off or does it return to the side of the window
 
Yea my normal and fast work ok as well. Does yours stop anywhere on window when you switch it off or does it return to the side of the window
When I put it to go it stops about 3 times to do a swipe,then if I switch it off it stops half way,so got to turn it to 1 to come back to side,,very frustrating
 

Tractortech

Member
Location
Cumbria
Now Then..
The wiper switch sends signals to the BIF, which then sends a signal to PC0. It's PC0 which drives the wiper motor. The switch can be checked by looking at the BIF on the Command Center
 
Now Then..
The wiper switch sends signals to the BIF, which then sends a signal to PC0. It's PC0 which drives the wiper motor. The switch can be checked by looking at the BIF on the Command Center

Thanks ive looked in the command centre and cant find any issues if i pull the relay it just does exactly the same which is rather confusing
 

Will you help clear snow?

  • yes

    Votes: 70 32.0%
  • no

    Votes: 149 68.0%

The London Palladium event “BPR Seminar”

  • 15,003
  • 234
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top