Search results

Morning all, started losing some 1month old cade lambs and have another going this morning. They start by losing their back legs like a bacterial infection and injections don’t pull them back. They’re on grass with a shepherdhess and I’ve noticed something strange in the milk mixing bucket the...

Hi all, is there a general shortage of Fox? Have had some on order for a while... Walking OSR this morning and the frosts haven’t keeled the charlock. Any other alternatives? Cheers

Hi guys, picked up a s/h 360 biodrill (electric metering, not electro-hyd) and want to fit onto the rapid for avadex. Has anyone any experience of wiring it into the standard drill control box please? My control box has the additional row of buttons on the side, in the manual shows how to use...

Got an old brick barn with the front wall slowly splaying outwards near a window - the floor joist is slowly coming out of the brickwork so needs fixing. Builder suggests fit couple of wall ties alongside the joists to hold the front & back wall together then lintel over window inside. Question...

Hi all, I couldn’t see any threads running on this but it must be affecting a lot of us with coastal farms? Natural England are working around the country proposing a public access walking route for a nationwide coastal path. From their manner and letter this seems to be obligatory and forces...

Hello gents, I want to fit the second hydraulic side knife which I’ve had sat in the shed for years and I’m head scratching... Are the two hydraulic motors normally connected in series, with the output from motor 1 feeding into motor 2? I wondered if the back pressure would damage the 1st...

Evening gents, would anyone be able to transport a cherry picker from Lancaster j33 M6 down to near j5 on M2 please? Thanks, 07762568090

Hi, before I rip into this and send the motor for rewinding, can I run this past you guys please? As I see it, the fan motor isn't starting in star but when relays change to delta it ramps up. So I press start and on 3 wires down to motor off the star relay I've got 240V available on 3 phases...

Hello all, I need advice on the best way to stop a wet floor please! The yard is on a gradient and so the machinery shed (75x45) has one long side and part of the back which is 3' below yard level with a soil bank graded down to near the side of shed. The shed floor is just hardcore / crushed...

Hi, please could anyone clarify if i'm okay to drill spring beans after ploughing in digested sewage cake? I'm not in an NVZ and I can't see it in cross compliance but thought i remembered this being a no-no ? Cheers