Search results

We are wanting to drill Dap with our spring barley. Will we get any seed damage if we put 100kg of Dap with 175kg of seed?

Which am I best to buy. Do the plastic have as good airflow as the metal ?

In the process of ordering some pedestals for a new store. Plastic damages less than metal but is the airflow as good ?

Our CR seems to back up with rape straw on the PSD belt when chopping. It is a known problem, but our dealer just keeps telling us the crop isn't fit. I have run other makes of combines and it has never been a problem` Has anyone got any answers ?

Horsch are telling me I can't replace the bearings and have to buy the whole hub. Has anyone managed to just change the bearing?

We have a new grain store and looking at different cooling systems. Is anyone using this system or have experience of it?

Need a Vaderstad Topdown trailed cultivator moving from Devizes to Nuneaton Please call 07770860422

Need a Vaderstad Topdown trailed cultivator moving from Devizes to Nuneaton. Please call 07770860422

We need about 7 loads moving during August. Please call 07770860422

Good used low loader wanted. We are based in the midlands. Please tel 0770860422 if you have one for sale.

4.5m Subsoiler needs moving from Ashford to Nuneaton. If anyone can help please call 07770860422

Planning a new 80 foot span grain store which is 24 feet to the eaves. Is it going to be high enough to tip artics in? If I go up to 30 feet to the eaves steel work cost goes up considerably.

We need a good value second hand tracked tractor for next season. Have run a Challenger 765C in the past which was good, but noise levels in the cab were awful. The 765D seems a lot more operator friendly but people say don't touch them as they are unreliable, is this the case or is it just a...

We find our current green trailers good but too heavy to keep us under 31 tonnes. Are other colour trailers much lighter?

Does anyone know of any grants available for a new drill. I understand there was a leader grant at one time.

We will be using liquid starter Fert this year, placing it in bands with the seed. Is it essential to put Phosphate and N on or is N enough? I only ask as we make our own Liquid Fert and am unsure if I can melt phosphate into a Liquid. Purchased liquid N&P mix seems very expensive.

We need a drill to fit a 4 or 6 meter folding power would consider whole outfit

We need a drill to fit our 6 m Kuhn p harrow if anyone has one for sale. Would buy a complete outfit with p harrow.

We need a front seed hopper to supply a rear mounted drill. Can I just convert a normal Accord hopper with a hydraulic fan to fit on the front or is a DF1 hopper fan bigger to give it a bit more puff to blow the seed to rear?

As above anything considered. Would consider one needing attention.