Search results

Pen her up with the lamb, and keep holding her every few hours to let the lamb drink. Can take days, maybe a week but generally they will take 1 lamb no bother doing this.

Forgot to mention the PS, nearly everyone who saw it on the yard or drove it round the field said does it stand for poverty spec! Although the one we had must of been a basic, no electric spools and no screen.

Having driven a x7.670 on a 69 plate on harvest for 2020. Overall everyone who drove it liked it, FPT pulled like a train and gearbox was smooth and simple once we got used to it. Carraro front axle is another plus point. List price we where told was £80k, would we have paid it, no. If priced...

If it stops changing ranges when hot or been used for a few hours, consider moving the solenoids around on the valve chest on the exhaust side of the gearbox. If the problem moves from 3 to another range the solenoid is knackered. Always best with dyna 6 is to swap all the range solenoids as a...

Sumo Trio 3 trailed being pulled by a Quadtrac 9380 through really tough heavy clay, 34l a hour, 7 ish litres per acre

Instead of ploughing, would it work for your system now if you used a sumo trio 3 instead of plough then follow with your combi? On the heavy clay here, we sumo and drill with a vad rapid 4m, a mx170 handled the drill fine last year but we still have the 4m kuhn venta combi on suffolk coulters

Ive been in a workshop having a solenoid change on a fendt 718 and went for a walk round. Pretty sure I saw a bloke working on a 500 series vario. Cab was either on blocks or chained to the overhead crane and the rear axle rolled out from underneath it to get to the box.

Scammers scamming scammers............................. Karma is an evil mistress

Drove mainly a Arion 660 for about 3 months earlier this year. 185hp with boost above 15kph to 205hp. The 600 series c-matic I think is claas built and the larger axions 800-900 are zf boxes. Pros - As simple to use as any other vario, no selectable ranges as such but 3 set speeds can be set...

Power and torque delivery is totally different using a vario or powershift box. When you downshift a manual/powershift you instantly disconnect drive, move/change clutch packs and then slam all the torque back to the wheels causing wheel slip. Ive got a claas vario up a bank that the other...

Its all well and good saying there is a staff shortage, but in my situation, I've had tons of work offered my way but the wages almost don't make it worthwhile. When I work away for harvest, it's £10 per hour self-employed but I get a large and fairly modern static caravan with no bills. Fine...

Having used a 6 furrow version of both, the multimaster is best set at 14 inch and left. The vari-master was a lump of a thing to lift so required a fair bit of front weight. I barely adjusted furrow width, but it all comes down to soil type, if its similar across your land, then multi would...

His father lived in the city, it was being burned to the ground by 'BLM' protesters. However in some of the evidence shown you can hear the first death, Joseph Rosenbaum shouting at black protesters shoot me 'n' word over and over. Plus he was also a convicted child rapist. All Kyle did to...

If its stuck out enough, weld a threaded bar to it and use a slide hammer to pull it out

Not a clue on a Massey unfortunately.

Has tractor had flat battery or anything to cause screen to reset? Try changing correction to egnos and see if it works on that. Have seen recently a case Trimble reciever full of water, showing satatelites on the screen but unable to get RTX signal.

RTK, Trimble RTX, EGNOS?? Whats your correction signal set to use? If using RTK/X is your key still in date?

Depends on the year and whether its a Cebis or CIS spec. You can change shuttle responsiveness from the buttons and scroll wheel on right hand panel on the dashboard.

You can buy a milk warmer, like an immersion heater with a 13 amp plug on and on a timer. We put waste milk from parlour into taxi after am/pm milking and heater warms up ready for the morning/evening feeding.

Friend of mine replaced bald michelins off a JCB 536/60 with galaxy's. Feeding twice a day and mostly onroad/concrete work they barely lasted 1000-1500hrs however the michelins lasted 3500hrs.