This is a random one.
The previous owners of our land used to keep horses.
Instead of having the muck removed they decided to pile it up amongst the trees down one side.
I’ve been looking to get this out for some time but a lot of the farmers are reluctant to take it away.
Not sure if this is...
Anyone have any experience with the PTO on a Claas Axos.
If I put the PTO in to 540 it slots in with out any grinding or crunching at all. Then move the other PTO lever to release the clutch and nothing happens.
Do the same thing in 1000 grinds to go in to 1000 but the release the clutch and...
I’m finally looking at getting some attachments for the front loader of the wee Claas. After finding out the loader is a MX loader not a Quickie loader that it’s badged up to be I’m finding it difficult to get an answer on what type of headstock this is.
i believe it to be a Euro headstock but...
Evening all
back for more advice.
What size compressor would you use for inflating tractor tyres.
I’ve seen the PTO ones but would a 4x4 in car compressor work. It maxes out at 80psi not sure about the CFM though.
or would it be a 50lt, 100lt, 200lt compressor?
thanks
I've not long got a hold of a wee Claas Axos tractor with an MX loader on it.
There are 2 hydraulic pipes coming from the loader to the rear spools of the tractor. One is going in to the top of one of the spools the other to the top of the other spool.
Im assuming these are feed and return...
Hi there.
Has anyone had any dealings with this type of multi coupler. It started leaking the other day so i was looking to put some new seals in the top half.
I can't find who makes it, or if i can put new seals in it at all.
The quicke Q41 is fitted to a Class Axos
Be interested to know if...
Hey I’m looking for a parts catalog for a ford 4630.
I have the operators manual, the shop manual and even the big service manual but can’t seam to find a parts catalog. I’ve notice that there are different parts for the 4630 with and with out cab and then normal and deluxe cab.
Any ideas...
After some more advice from your wealth of knollage. I’ve attached a picture of the throttle linkage on the tractor. The left rod as your looking at the picture is the foot throttle and the right the hand throttle. Does anyone know how these work. I would believe that the foot throttle should...
Just looking for a bit of advice. I’m just got a hold of a ford 4630. It’s a little rough and quite a few bits are seized. Including the lift arms. But I’ll come back to those another day.
The tractor drive grand no bother but the clutch arm seams to pivot in the centre with the clutch cable...
Just looking for a bit of advice on this. I’m looking at a used tractor 20 years old, to use at a stables. I’m not VAT registered. Is the VAT 20% on the tractor.
So if the cost was £4000
The total including VAT would be £4800
Thanks
Bit of a broad subject this but I’m going to ask anyway.
I’ve recently got a hold of 10ah of land that I’m planning on taking hay from. All for my horses and maybe to sell a few and was looking at a tractor that could handle the work load.
A few day ago I’ve found out there is work lifting...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.