MX front loader hitch

[Tibbo]

I’m finally looking at getting some attachments for the front loader of the wee Claas. After finding out the loader is a MX loader not a Quickie loader that it’s badged up to be I’m finding it difficult to get an answer on what type of headstock this is.

i believe it to be a Euro headstock but have been told it’s a multi purpose one ?
Can any body shine a light on this one.
Thanks

 

[C.J]

I agree yours is a Euro / quicke No8.

Below is a euro combi which will take quicke 3 and 8

 

[Fendt516profi]

Euro8 don't worry about what else it will pick up you'll find it easier to find the attachments you want on euros than anything else

 

[Tibbo]

Thanks for that always good to get a confirmation before getting some attachments

 

[baldhaasteagle]

I’m looking at a tanco loader with an MX headstock. I’m trying to determine what implements fit it and came across this thread. Can someone clarify does it fit euro brackets? Or would I need an adapter to suit?

 

[balerman]

Unusual to see an MX loader badged as quicke,but that is what it looks like.

 

[organic antares]

I’m looking at a tanco loader with an MX headstock. I’m trying to determine what implements fit it and came across this thread. Can someone clarify does it fit euro brackets? Or would I need an adapter to suit?

Picture of your headstock will help.

 

[baldhaasteagle]

 

[Fendt516profi]

I don't think that's euro 8 and top bar looks to thick for euro 3

 

[baldhaasteagle]

Sorry I should have said the man selling it says the top bar is Euro size … would that mean it’s euro compatible or is there more to it?

 

[nonemouse]

Sorry I should have said the man selling it says the top bar is Euro size … would that mean it’s euro compatible or is there more to it?

Could be euro size hitch. It’s definitely not for MX’s own brackets

 

[Fendt516profi]

Sorry I should have said the man selling it says the top bar is Euro size … would that mean it’s euro compatible or is there more to it?

May be euro size bar but I don't believe the locking pins are in the correct position or that they locate into something after going through the attachment like euros do

 

[Fendt516profi]

Reminds me of a farmhand headstock I had
This is a euro with dimensions on for you to compare

 

[mar]

Sorry I should have said the man selling it says the top bar is Euro size … would that mean it’s euro compatible or is there more to it?

On a Euro headstock the top bar is 40mm Diameter


This is a MX headstock in the picture below

 

[geoff570]

Looks like faucheaux brackets to me , not seen one for a long time some measurements would be helpful

 

[Fendt516profi]

Looks like faucheaux brackets to me , not seen one for a long time some measurements would be helpful

It does