Need to rivet a large amount of standard sized stainless steel pop rivets. Looking at an air powered one to speed the job up, any recommendations, Chicago Pneumatic etc?
Also will need a manual one to get in very tight spots, haven't had much luck with cheap/sealey ones in the past. Any ideas?
Looking at speccing our 16000 litre water/fert bowser with a 3 inch engine Pacer pump. The price difference is over £900 for a Kohler diesel over the Honda engine. Will check with supplier, seems the Kohler is a larger HP. Can the Honda manage with pumping fertiliser or is it at its limit? I see...
Looking for a flail topper with hammer styled flails preferably. Front mounted, although would consider a side hydraulic rear one or even better a batwing flail.
Cheers.
I purchased these large industrial doors with the intention of fitting them to existing sheds, but the can't see me having the time to fit them. Wondering if they would be of any interest on here.
4 Large Roller Shutter Doors
2 x Approximately 7m wide and 4.5m high (identical)
1 x Approximately...
Seen plenty of large (10k+ litres) milk insulated stainless static tanks. Look the perfect shape and size for a tank for a spray/water bowser. Never seen one in person though. Are they strong enough for transportation purposes? Or do they lack the wall thickness/ baffling and strengthening...
I have a large selection of the brackets, supports, fixings etc neccesary to tilt the older style Fendt cab up. Should be suitable for 415, 714, 716, 718, 818, 820 (COM 1, 2 & 3) etc. Had a bit of interest in people wanting them, so looking at getting some identical replicas made.
Should be...
Looking to purchase a parts washer. Reasonable size. 1.5 x 1 meter type job. Is there any professional manufacturers to recommend? Just want to avoid Sealey and other Chinese crap. Bonus points for British made.
Need a large majority of parts for a Fendt 818. As usual, the dealer prices are deranged. Found a large majority of the parts on Granit.
What is the quality like? Are there certain types of parts to avoid? Looking at a new air conditioning compressor, alternator and other bits and bobs.
Or is...
Looking for a set of complete tyres or just rims of the above size for a Fendt 700/smaller 800 series. Not worried on condition of tyre or brand.
Do have a set of 650/65 R42 & 540/65 R30 rims off a 820/720 if interested in swapping.
Looking to purchase a complete workshop manual for a 2006 Fendt 818. Tried purchasing online copies but they are incomplete. Prefer PDF but any format is okay, Very reasonable cash payment to someone who sources me a copy first!
Looking for a recommended insurance company for hand tools, power tools & workshop equipment (plasma, welder etc). Most of the time these will be kept in my van. Cheers
Recently brought a used Hydrovane PU23. Is it normal for these to make a boiling/bubbling noise like a kettle once they are switched off? Haven't quite got around to understanding how these compressors work, to know if this noise is normal?
Taken on a few refurb projects on during winter to keep busy. Invested in shot blasting equipment and relevant PPE to then repaint. Very inexperienced with spray painting, although looking to learn and become more experienced with practice. The machinery is mainly trailers, bowsers and...
3 pairs of large used industrial concertina sliding doors.
Each pair is for 6m x 6m doorway (approximately, will get more exact measurements in due course). I believe these can be easily cut down or reduced in width if necessary)
Very good condition with no dents.
Brought as part of a job lot...
Could anyone be so kind to give approximate price for 25/30ft wide lean to an existing steel portal potato store 80ft long. 16ft *(not 20ft, re edited)* bays with a fibre cement roof. With no cladding on both the side and ends. Price including installation and manufacture.
Got a large quantity of 5/20/25L oil drums and finding it very difficult to find a recycler/disposal company which take these. Even spoken to Witham oil and they couldn't answer the question. Very frustrating. Only quote I received was for £5 a can which is eye watering. Happy to drain and clean...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.