Just a quick question , answers welcome from managers down to us lowly machinery operators.
As the title suggests the air con is inop on our front line tractor today ( its had recurrent problems in the last month) on asking my manager today his plans for today he suggested I go subsoiling with...
Pretty much as the title says , most of our acerage is steep ( Class Montanna is past its limits on 50% of the acerage!) what I'm seeing this year is that when the Claydon is crabbing the row widths open up and let in way too much light and hence the invasion of meadow grass.
Any ideas from...
Putting it out there to those in the know, we have a NH T260 running on Centre point RTX reciever make unknown , tractor is 5 years old.
Same old issue occuring today with the tractor being 30 to 50 cms off the A B line and the colouring in not colouring in , it also does it on occasion with...
A quick question if I may to those more experienced than me on this machine! The operators manual is a bit on the light side and dosen't cover the question !!
There are two switches in the cab for the front and rear wheel drives, showing a tortoise and a hare. I'm working on some steep/ very...
As the title says I urgently need a PA2 course and assessment , based in the SW of the UK .
Any forum members know of anyone or company that can do this at short notice ?
Had to use it yesterday , took the Ambulance straight to us .
If you havent got it , I'd highly recommend getting it !
Just to add keep your phone on you when working alone and outside your machine , this chap wouldn't have been found for 4 hours if he left the phone in his vehicle!!
The problem .... a leaking sequencing valve on a 5 furrow KV reversible causing the plough to decrease in width in work.
Solution 1 would be a new valve at £1000 we'd rather not!
Solution 2 and here is where the great minds off TFF come in........... take the pipes off the sequencing valve...
To cut a long story short. Balance belt came off and took the cam belt with it, the head is totalled !
Can anyone point me in the right direction of a reasonable salvage value ? I'm told by my local indy garage that 1200 to 1500 is the ballpark.
I'm not wanting to go down the recon engine route...
Putting it out to the forum. Our local stealers want 120 odd quid for the sensor on the drive wheel of our Rapid. Anyone know if this sensor can be obtained elsewhere at a more realistic price?
Picture attached for refrence the Vaddy part No is 445822 described as a sensor and No 38 in the...
Can anyone explain in laymans terms what the function of the buttons in the attached picture actually do.... there is nothing in the help section on the vario guide that explains much and no documation supplied with a recent Trimble upgrade from topcon! Running Rangepoint RTX and Fendts countour...
Putting it out to the combined knowledge of my peers on here. New metal needed on a Trio but its obviously not the standard Trio point and wings.... so the question is who supplies this type of point? My little bit of googling so far suggests JJ Metcalf?
As above
Given that when its unfolded the inner bearings are a bit of a sod to get too. Anyone changed the bearings on the packer and what might be the best way to go about it.
Help! Something that the learned members of TFF may be able to help with.
Recently I'm getting more and more warnings coming up on my Fendt 930, it reads "WAS bias > 3 degrees"
Is this an issue and is there anything I can do to stop the annoying warnings..... google brings up zero! Also what...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.