Fendt countour assist upgrade

[Andy12345]

Can anyone explain in laymans terms what the function of the buttons in the attached picture actually do.... there is nothing in the help section on the vario guide that explains much and no documation supplied with a recent Trimble upgrade from topcon! Running Rangepoint RTX and Fendts countour assist...... which I must add is bloody superb

 

[Northern farmer]

Wayline nudge? Not sure, don't need nudge with RTK.

You say it was a recent upgrade, do they still have some offers for the swap?

 

[Andy12345]

Wayline nudge? Not sure, don't need nudge with RTK.

You say it was a recent upgrade, do they still have some offers for the swap?

Its a nudge feature for sure but I still retain the original nudge page , this does something totally different and I've no idea of its exact use!

I think there are still some offers on the Contour Assist .

 

[jamesfalky]

That is a nudge function for if you experience drift, so you can correct the wayline/boundary in both directions (ie. north/south and east/west)

 

[Andy12345]

That is a nudge function for if you experience drift, so you can correct the wayline/boundary in both directions (ie. north/south and east/west)

Thank you that would explain it. Although only on Rangepoint RTX boundarys/contour lines seem to have stayed static over time, mapped contour lines on all mowing fields at first cut and have successfully auto steered headlands on 2nd 3rd and 4th cuts!