ford

Hi im trying to fit assister rams to a power major and a new performance super major to aid in lifting a 5 furrows Ransomes plough. I have brackets, rams, fittings etc. Does anyone know how to plumb them in to the top cover? Any pics or info appreciated.

I've 2 Ford 6610s, a mk1 from 1984 and a mk2 from 1986. The mk2 is seriously down on power and we can't work out why, it won't keep up with the mk1 at all and both are NA standard, we've done all of the usual checks and gone through the fuel system and fixed any issues with the lines dragging...

Hello i am hellping a friend fix his Ford 7740 the tractor is showing error e24 and the tractor drives but the cluch dosent work properly when you start letting it go there is nothing til the last mm the boom the tractor jumps it has a new cluch new dapener new fluids nothing wrion iside the...

Hello i am hellping a friend fix his Ford 7740 the tractor is showing error e24 and the tractor drives but the cluch dosent work properly when you start letting it go there is nothing til the last mm the boom the tractor jumps it has a new cluch new dapener new fluids nothing wrion iside the...

The rear link arms on my 7840 seem to be stuck at 20% if I lift the leaver the oil flows but nothing happens, they won't go down bellow 20% either, guessing air in the system? Is there a way to bleed the linkage system? (I can lift the arms up to their max by hand)

Hi, Replacing power steering pipes on Ford 7810 and stupidly didn't label connections on motor side. Picture of motor attached - can anyone advise which connector are for pump supply/ pump return/ steer left/right. Any advise appreciated. Thank you John

Trouble with my 7840, It will drive when started for maybe 5 seconds with E18 code on the dash (cant change powershift gears) then E20 comes up & it stops all drive, until I turn the ignition off & on then it will drive again for 5 seconds.. repeat. Any ideas as to what E20 is? I cant find any...

Hi. Few days ago, I started up my 8730 and felt that the reverse clutch needed to be calibrated. the tractor worked just fine before calibration only H1 error was showing. Started the calibration procedure and reverse clutch got up to 100 and threw an error. Now it shows me H1 and H3 error on...

Hello. I brought a used 8730 powershift with reverse clutch problem. We changed the reverse clutch and now we have to calibrate it, but the problem is that it doesn't allow to start the calibration. I think the problem is that someone cut the wires for tachometer, and it doesn't see the rpm and...

Hello all, I have just bought a series 2 ford 7610 as a non runner which I have now got running but when I use 1st gear it makes a horrendous knocking nose and it does it in all ranges and reverse but 2nd, 3rd and 4th gear are fine and also the pto won’t stop but I doubt they are related, if any...

Hello all, I have just bought a series 2 ford 7610 as a non runner which I have now got going, but when I use 1st gear it makes a horrendous knocking nose and it does it in all of the ranges but 2nd, 3rd and 4th gear are fine also the pto won’t stop but I doubt it would make any difference if...

Edward Buckland Ltd, April's Online Auction. Starts Saturday 21st and Ends Friday 29th January from 9am on wards. With something for everyone including a Ford TE25 and a Ford 7810 ... Don't miss out. Access the Auction via the link below or contact the team on 01872 306090 or...

Hi, I have spent the past week fitting a front end loader to my ford 7840, I thought I could join the hydraulics to the loader distributor in before the spool valves on the back, which works fine for the loader but now I have no spool valves unless I engage the loader lever first. Anyone know...

I am curious if anyone can help me identify what this is on my 1993 Ford 7840 sle. Its positioned just beneath the left hand side of the cab. Thanks in advance.

I’m new here and hoping for some help please. I have a Ford 335 (1984) which i have bought recently. I seem to have an oil leak from the handbrake housing unit? This is under the tractor on the right hand-side. Someone mentioned to me that it is likely to be a faulty seal in the gearbox...

Hello, does anyone have any realife experience of the Donfeng tractors from China (established 1952), imported as Land Legend by Sid / Cowling Agri (4WD, loader,4-in-1 bucket and a range of good value trailer/accessories ready to ship)? I've spoken to a few dealers who say they are actualy good...

I have finally got all my ducks in a row for purchasing a tractor in March 2021 for £11,500 - £14,500. A few years ago I asked which one I should look at and got an avalanche of advice. I am going to use the tractor for moving heavy pallets about the yard as well as for the 15 acre farm. I am...

Hi I have a 5640 sle. Just developed a problem jumped in it today start up fine but cannot change gears, the numbers 1-4/5-8 do not light up as normal ?? Any ideas appreciated. Cheers

Hi all, looking for advice on parts and where the source them from please? See photos attached from parts manual online, the steering wheel gas strut on a NH 8770 has packed up. The parts I think are; Part 5 / 5a / 6 & 7. Based in UK. Any links or advice greatly appreciated. Thanks all.

Hi guys , looking for a bit of help , have a c reg tw 35 , was driving fine untill pressed the duel power when arriving at field and then the light went out and its stuck in low box and 4wd is stuck on .. now tried a few things and discovered it keeps popping fuses , the 4wd solenoid seems to be...