spreader

Hi all, I'm in Australia and have been spreading fertiliser the last couple of days on rough fields and am getting thrown around in the tractor due to the trailed spreader not having any suspension. I am wondering what you guys use? Whether there is an aftermarket cushion hitch to go on the...

Recently bought a KRM L1 plus second hand come with no Manuel does anyone know how to change the spread width on it to 18 metres from 12?

Hi all, Recently bought an old Bunning rear discharge. Before I go out spreading with it, I wanted to check that it's set up OK. The flingers on the back are in contact with the table when they rotate. I was thinking this will wear the table out pretty quick? Should the flingers be spaced from...

Just wondering if anyone has had an issue with a weigh cell failure on a kv spreader? I’ll try and keep this short, Parked the spreader up the other night with a couple of hundred kg still in the hopper as I was carrying on spreading first job next day, fire it up following morning and the...

As above really, what distance are you guys getting away with on Urea fertiliser and which brand of spreader are you using? Currently looking at a new Kv machine but would like a users opinion on it before I start throwing money around!

I'm looking at buying a new fertilizer spreader and the two models I have looked at are the Amazone ZAM and the Teagle Centreliner SE. Any information on the good and bad points of these spreaders would be useful. I currently run an Amazone ZAX which hasn't impressed me much. I need a machine...

We are looking for an enthusiastic self motivated operator to drive one of our Multi-drive self propelled Lime Spreaders for the Harvest Season, with the possibility of making the position permanent for the right candidate. Working throughout the Midlands and East Anglia we are a small but...

Looking for a competent tractor driver. Based near Bury St Edmunds, Suffolk the position is for lime spreading in Norfolk/Suffolk/Cambs. Position would be from mid/late July to end of September/October but strong possibility of employment until end of year which could be flexible if required.

Hi all, Got some Lithan Ammonium Nitrate to put on for a customer in a couple of days. been looking in the Amazone calibration charts and cant find it. Anyone know any settings or can point me in the right direction? Using V-Set 3 discs. Thanks

Hello everyone i was looking for a manual for a Bezzecchi SQ.600T Fertilizer spreader its a wagtail version or if anyone can tell me what the settings would be for spreading. Thanks

Hi everyone, I'm hoping you can help me cause I'm out of ideas. As above, I have a lely Centermatic spreader and am having serious issues with the computer. This is the scenario, the spreader is empty, I press the start button as if I am spreading and even with no fert in the spreader and no...

We're looking at investing in a side discharge compost spreader for our apple orchard to spread mainly green council waste for mulching, but struggling with finding many options for the UK, does anyone have any experience with any of these? Any other suggestions? Agrofer...