Abbey topper drive pulley

[reverand]

anyone know how to get the drive pulley of an abbey trailed topper. Need to change the bearings

 

[del_boy]

Big nut on bottom to remove blade holder, depending on which way it turns it might be a left hand thread

 

[reverand]

Done that but that doesn’t allow it to come off

 

[marco]

Done that but that doesn’t allow it to come off

Put up a few pictures.....

 

[reverand]

Will do in morn. I’ve just cut my eye open when the breaker bar slipped off. Had enough and gone home sulking

 

[sawdust]

 

[reverand]

Tried that, in fact mine was bigger

 

[agrimax]

Sorry.........!

 

[reverand]

Does the actual pulley pull off a splined shaft?

 

[Dave W]

Can you see up where the big nut and washer has come from? It might look like a 6 spline pto but it's actually tapered as well. Just be really brutal with it

 

[sawdust]

Tried that, in fact mine was bigger

Than a 14lbs hammer

 

[reverand]

I have them custom made for my mechanicing

 

[reverand]

Can you see up where the big nut and washer has come from? It might look like a 6 spline pto but it's actually tapered as well. Just be really brutal with it

There is no big washer and nut on top just three bolts that come from the rubber donuts down in to the pulley wheel