- Location
- Shropshire
And the grab in the backgroundHave flat 8 sledge and bale Carier available also, View attachment 1114830View attachment 1114831View attachment 1114832View attachment 1114833
And the grab in the backgroundHave flat 8 sledge and bale Carier available also, View attachment 1114830View attachment 1114831View attachment 1114832View attachment 1114833
What do you want , enough spares up the road for 50 balers .I think the Bamford will be impossible to get parts
Will bow to your knowledgeWhat do you want , enough spares up the road for 50 balers .
Billy Whizz is the manWill bow to your knowledge
No, don’t think there’s anything specific available for them apart from bearings and chains and whatever can be welded or fabricated!!I think the Bamford will be impossible to get parts
IH should be possible but dubious. I believe NH will be the best bet
hope they have plenty of needle's cus they eat emWhat do you want , enough spares up the road for 50 balers .
True story:No, don’t think there’s anything specific available for them apart from bearings and chains and whatever can be welded or fabricated!!
That one came here brand new apparently and next door had an identical one! Next door had issues with theirs and in the end someone from Bamford had to come out to it. They fiddled with timing etc and it was then a much better baler than that one with much nicer and firmer bales. Fast forward a generation and that one broke down and the neighbours one was offered free to collect. It had been standing a long time but was freed off and baled fine. Unfortunately metal work was not the best. It went to scrap few years ago now but we kept needles and few things. There’s a pto shaft with a blue PTO guard somewhere for it but I’ve never seen a flywheel guard for it unfortunately. Dad never re fits anything that’s not critical to the operation of any machine after a repair, you know like windows, covers, floors, mats, cladding, bonnets, side panels, exhausts etc!!!
I think that one baled and knotted a bale about fifteen years ago! It’s not stuck, I checked last week when I came across it at the back of shed!!!
What do you want for the sledge? All working OK?Have flat 8 sledge and bale Carier available also, View attachment 1114830View attachment 1114831View attachment 1114832View attachment 1114833
Yes all okayWhat do you want for the sledge? All working OK?
Delivered ?Yes all okay
£200 it’s yours,