TaKeN
Member
Evening all,
I need to remove a stubborn M20 Hex socket screw from the underside of our tractor, I managed to get two undone using some 1/2" Impact sockets with our Makita DTW450 but one just won't budge.
The plan is now to use a 3/4 tool with our oversized breaker bar. The question is, do I opt for the cheaper Impact tool such as this > http://www.ebay.co.uk/itm/BGS-17-mm...402917?hash=item41b61faae5:g:Ff0AAOSwx2dYCr6m
or do I buy the more expensive one such as this > http://www.ebay.co.uk/itm/Elora-155...992180?hash=item43d4435874:g:cRMAAOSw9GhYe~m4
or even this > http://www.ebay.co.uk/itm/Gedore-62...727294?hash=item257fbaa0fe:g:jAQAAMXQKLdR0A5c
Google suggests that the impact are softer, and the vanadium is harder but brittle?
I just want the one that can take the most force without shearing! Thanks.
I need to remove a stubborn M20 Hex socket screw from the underside of our tractor, I managed to get two undone using some 1/2" Impact sockets with our Makita DTW450 but one just won't budge.
The plan is now to use a 3/4 tool with our oversized breaker bar. The question is, do I opt for the cheaper Impact tool such as this > http://www.ebay.co.uk/itm/BGS-17-mm...402917?hash=item41b61faae5:g:Ff0AAOSwx2dYCr6m
or do I buy the more expensive one such as this > http://www.ebay.co.uk/itm/Elora-155...992180?hash=item43d4435874:g:cRMAAOSw9GhYe~m4
or even this > http://www.ebay.co.uk/itm/Gedore-62...727294?hash=item257fbaa0fe:g:jAQAAMXQKLdR0A5c
Google suggests that the impact are softer, and the vanadium is harder but brittle?
I just want the one that can take the most force without shearing! Thanks.
Last edited: