Agritechnica 2015 Photo Gallery

[Graham Smith]

I'm looking forward to it and going to be there Tuesday and Wednesday. To brighten things up Nordic Lights are there in Hall 15 Stand 10
G

 

[Dave Franciosy]

D series Rogator sprayer, they seem to be on a roll at the moment

I presume you're taking your camera !! Look forward to the pictures

Be rude not too I will get some photos in between meetings

 

[oldoaktree]

Some nice German crumpet but not hairy

You'll be lucky

 

[CATengustav]

I like to see the new claydon t4 drill.

 

[Mrs Brown]

I would like to see new 6R series MY2016 interior, especially those with new Command Arm, actually in the cabin are all the changes.

Thanks

Get some pictures of their new R loader too

 

[bluegreen]

It's only a 8310 with the new cab, plenty of pics floating around out there if you look hard enough

UK launch for the T7 HD tomorrow. Nice little video for you @bluegreen of one working somewhere in europe

Im afraid NH have been out done by CASE this time round mate, the new Optum and PUMAs looks much nicer than the T7s............why NH plumbed for tiny roof lights and shrunken front headlamps I don't know, but they look naff !!
From the Quadtrac all the way down to the new Maxxums CASE models are aesthetically more pleasing on the eye than their blue counterparts....................even the Axial flow looks better than the NH CR!!

Just a shame CASE models aren't painted in NH yellow and blue paint

 

[Mouser]

Im afraid NH have been out done by CASE this time round mate, the new Optum and PUMAs looks much nicer than the T7s............why NH plumbed for tiny roof lights and shrunken front headlamps I don't know, but they look naff !!
From the Quadtrac all the way down to the new Maxxums CASE models are aesthetically more pleasing on the eye than their blue counterparts....................even the Axial flow looks better than the NH CR!!

Just a shame CASE models aren't painted in NH yellow and blue paint

This is clearly a matter of opinion, i know this because mine is different
Don't like new puma at all

 

[eagleye]

Somephotos of this tractor called a "grey ferguson, tired of walking behind the horse when ploughing

 

[james ds]

A few pictures from Agritechnia

 

[bluegreen]

OMG that Ursus tractor would have looked old fashioned in the 80s let alone now!!

Have Claas released the 990 forager yet?

 

[llamedos]

Lovol Arbos Group live from Agritechnica 2015

The first official appearance for Arbos, with the exclusive preview of the new product ranges under that brand.

From 8 to 14 November in Hall 5 of the prestigious Hanover trade fair, you can see the long-awaited new items: not just the new Arbos vehicles, but also the new Arbos logo, resulting from a thorough re-interpretation that keeps to and enhances the values of the brand’s glorious past.

A launch against the background of the ambitious project by the Chinese government “One Belt, One Road”, the modern Silk Road linking East and West, between China and Italy. Transferring know-how, ideas and experience and considering sustainability and environmental protection.

Live stream

 

[James Taylor]

I'm there too maybe I'll see you there!!

 

[llamedos]

Gold Medal winners

 

[llamedos]

Crop treatment requires farmers to look at a range of different information in order to decide on a specific treatment. The growing complexity of the information and statutory requirements they have to consider can lead to mis-application and the risk of spraying non-target areas.

The combination of Connected Crop Protection and the Chemical Application Manager is an intuitive system that helps users make a sound decision for a targeted, well-timed, and precise application. This integrated system relies on a range of key technologies that offer recommendations and operator assistance for filling and spraying and automatically take buffer zones into account and comes with full documentation. It also integrates the Chemical Application Manager, a joint development by BASF and John Deere in conjunction with public-sector partners ISIP, ZEPP, JKI and KTBL.

The data is transmitted in the universal ISO-XML format, an open format that allows the integration of further applications in the Manager. This industry standard will offer the possibility of integrating solutions from other partners and decision making assistance systems or the use of third-party spraying technology in the future. For the first time, this holistic system integrates all data, knowledge and tools that users need to come up with a treatment decision that implements application at variable rates and complies with national laws.

The user controls the cycle, plans and edits precision farming applications, documents the individual jobs and provides his partners with access to the consultation feature. So there is nothing stopping this defined, legally compliant application with non-contact operation through voice or gesture control and integral TankFillCalculator from being implemented. For added safety, the system scans product codes for further automation of the documentation.

In summary, this is the first system to provide farmers with a fast, efficient and integral method of crop treatment: from problem identification to treatment recommendation, an application that complies with the law and provides prompt and time-efficient documentation.

 

[llamedos]

Fendt VarioGrip Pro



AGCO GmbH – Fendt, Marktoberdorf, Germany; Hall 20, Stand B08f and

MITAS a. s., Prague, Czech Republic, Hall 20, Stand E29

Tyre pressure control systems offer many uncontested advantages, but also one drawback: they are very slow in inflating the tyres for road travel. Besides, they require the engine to be revving at high speeds to provide the necessary drive power for the compressor while the tractor is stationary.

The Fend 'VarioGrip Pro' uses an additional high-pressure tyre inside a bespoke and newly developed tyre. This internal tyre serves as an accumulator which allows the inflation pressure to be altered very quickly. The air is pumped into the internal tyre through a simple rotary union which also ensures it cannot escape. The valves involved and the pressure sensors are powered through inductive transmission inside the axle. The same applies to the control signals. Dispensing with extra compressors, pressure tanks and control lines, this technology is able to increase the inflation pressure from 0.8 bar to 1.8 within 30 seconds by exchanging the pressure directly and without having recourse to engine speed. This quick tyre pressure control system reduces the time spent in road travel and allows field work at low and soil-friendly pressures.

 

[llamedos]

Connected Nutrient Management



John Deere GmbH & Co. KG, Mannheim, Germany; Hall 13, Stand E30 and

LAND-DATA Eurosoft – a BayWa Company. Pfarrkirchen, Germany; Hall 15, Stand G30 and

Vista Geowissenschaftliche Fernerkundung GmbH, München, Germany, Hall 15, Stand G31j and

RAUCH Landmaschinenfabrik GmbH, Sinzheim, Germany, Hall 9, Stand A63 und SULKY BUREL, CHATEAUBOURG, France, Hall 11, Stand C23

Maintaining the nutrient balance of the field from harvest to harvest currently involves extensive calculation and planning efforts for the farmer.
Connected Nutrient Management is a user-friendly, optimized nutrient management system enabling the demand-oriented, precise application of organic and chemical N and P fertilizers. The system supports planning and optimization with a holistic, overall observation of the harvest history and includes technologies for highly precise fertilizer application.

The data, knowledge and key technologies owned by innovation partners John Deere, Land Data Eurosoft, VISTA, Rauch and Sulky have been tied up in a smart, complete bundle to offer the user an agronomically optimized, site-specific nutrient application system complying with fertilizer application regulations. This ensures higher precision when planning and applying organic or artificial fertilizers. At the same time, the system is a cost-cutter, optimizing yields in terms of quality and quantity while complying with the strict fertilizer regulations and offering site-specific documentation. For the first time ever, farmers will be able to precisely determine, apply and document nutrient demands (nitrogen, phosphates etc.) for specific sub-areas, regardless of the type of organic or artificial fertilizer used. Since nutrient distribution is optimized according to sub-area demands and vegetation times, it provides a higher level of nutrient efficiency and also optimizes nutrient balances.
There has never before been a similar integrated solution offering maximum customer value while proactively considering the prevailing environmental and legislative constraints.

 

[llamedos]

John Deere ProCut



John Deere GmbH & Co. KG, Mannheim, Germany; Hall 13, Stand E30

Especially in the heat of harvest, it is essential to keep the knives on the forager chopping drum sharp and to adjust the counterblade as appropriate.
John Deere's 'ProCut' controls the gap between the knives and the counterblade. The system does not measure the gap with the help of vibration sensors but with an inductive method and two special sensors. In addition, it is also possible to measure automatically the sharpness of all knives. The system offers great benefits for the customer, because it always indicates the best time to adjust the counterblade and sharpen the knives and also recommends the num-ber of grinds to be applied. With all elements always in their best condition, fuel consumption drops and so do the costs for knives, counterblade and grinder.

 

[llamedos]

From New Holland

The new T7. 25% more power. 60% fuel capacity. 11% more tyre width.

Heavy Duty in its new form. 315bhp

new generation of CX Series super conventional combines

Expanded range w/ new CX8.85 450hp six-strawwalker mode, now ranging from the 340hp CX7.80 to the 490hp CX8.90

 

[llamedos]

 

[llamedos]