Air horn

[NewlandFarmServices]

I have bought a twin air horn that i want to fit to my fendt 718, has everything in the kit and chose not to use the tractors air supply as thought that be more confusing. Just cant seem to find a decent place to attach it to, as on the roof there is no where to bolt it down and no room under bonnet. Just wondered if anyone has any suggestions and i no one may be 'stop been a big kid and leave it in the box' but boys will be boys!

 

[Chae1]

Don't think I ve ever used the horn on a tractor.

 

[L P]

I made a tool box mount off the left step on my old 716 and mounted one on the toolbox frame. Used a sleeved airtec solenoid and airline straight to tank... More flow=more noise! They are a pig for mounting anything on those fendts.

 

[ORRA LOON]

The Fendt lads round here mount them on the beacon brackets. The short twin horns type.

 

[roscoe erf]

don't bother

 

[Norm]

Easy to fit and reliable using on board air.

 

[stuart]

under the cab floor on the right hand side using step bracket if there is a step that side

 

[Hilly]

I have bought a twin air horn that i want to fit to my fendt 718, has everything in the kit and chose not to use the tractors air supply as thought that be more confusing. Just cant seem to find a decent place to attach it to, as on the roof there is no where to bolt it down and no room under bonnet. Just wondered if anyone has any suggestions and i no one may be 'stop been a big kid and leave it in the box' but boys will be boys!

Oh man, don't do it ! ebay is your friend

 

[NewlandFarmServices]

Thanks will have a look and see what's best and will look into the direct air supply. Have got a tool box on right so no steps just need to weigh my options up!

 

[NewlandFarmServices]

Oh man, don't do it ! ebay is your friend

Haha ebay not my friend at mo had right fallen out with them and too late box here just needs fitting

 

[Hilly]

Haha ebay not my friend at mo had right fallen out with them and too late box here just needs fitting

BEEP BEEP !!!!

 

[stuart]

http://www.cb-shack.co.uk/original-...WtAoddFMA9A&osCsid=7oj31ai5op243ug32llc485l21

this is what you want

 

[roscoe erf]

dont forget these

 

[Cowabunga]

Years ago I bought and fitted air horns to my Titan160. Fitted more-or-less to where the original horn was and wired in to the original horn wires. It is one of those twin plastic six inch horns with an alloy compressor about the size of an aerosol can. It has worked perfectly for ten years and is the only horn that frightens the dogs so that they whimper off with their tails between their legs.
Funnily enough I have been considering a set to fit the Honda because the original is so weedy.

 

[Hilly]

Years ago I bought and fitted air horns to my Titan160. Fitted more-or-less to where the original horn was and wired in to the original horn wires. It is one of those twin plastic six inch horns with an alloy compressor about the size of an aerosol can. It has worked perfectly for ten years and is the only horn that frightens the dogs so that they whimper off with their tails between their legs.
Funnily enough I have been considering a set to fit the Honda because the original is so weedy.

Don't forget they above ^

 

[Cowabunga]

Don't forget they above ^

"They Above ⇧" as in the two celestial teapots?

 

[NewlandFarmServices]

Thanks for all your help guys, may go with my origional idea of using fendt power air supply but went against it as wasnt sure how to connect it all up. I like the train horns that stuart said about and if get a relay and inline fuse and one of these solenoids and bit of pipeing/wire then would that be all i need to get it working. http://www.ebay.co.uk/itm/281157353456?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

I will be fitting cb aerials of my old fastrac soon, just one thing at once as Fendt all new to me.

 

[stuart]

Thanks for all your help guys, may go with my origional idea of using fendt power air supply but went against it as wasnt sure how to connect it all up. I like the train horns that stuart said about and if get a relay and inline fuse and one of these solenoids and bit of pipeing/wire then would that be all i need to get it working. http://www.ebay.co.uk/itm/281157353456?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

I will be fitting cb aerials of my old fastrac soon, just one thing at once as Fendt all new to me.

yes with the relay a bit of pipe some 2 core cable a fuse that should work and only put one aerial on your tractor dead center of the roof two become directional on a tractor as you cant get them far enough apart

 

[Hilly]

"They Above ⇧" as in the two celestial teapots?

And the twin sticks, essential for horse power

 

[Cowabunga]

And the twin sticks, essential for horse power

Ah yes, the twin flashy flashing things that flash and make it go faster.