Amazone levelling board

[chipchap]

Anyone else had problems with the thread adjusters going tight or seizing? Did you find a solution, because as far as I can deduce it is a very strange thread, M24x3.125. This is similar, but different to one inch UNC.

 

[nick...]

Mine are fine and never oiled and kept dry.i adjust them with a 17mm socket on a milwaukee impact wrench which works great but very stiff to adjust with a spanner
Nick...

 

[KennyO]

I have had to have gas on them. However i have fertiliser on my drill too so that doesn't help.

 

[chipchap]

Managed to screw them right out with the biggest stilsons we posses.. Put some oil on them and they are fine now. I think some of our Shropshire dirt may have got in the threads. The Amazone I had before did exactly the same. Oil and grease would tend to drag dust into the threads more I suspect.

 

[solo]

Managed to screw them right out with the biggest stilsons we posses.. Put some oil on them and they are fine now. I think some of our Shropshire dirt may have got in the threads. The Amazone I had before did exactly the same. Oil and grease would tend to drag dust into the threads more I suspect.

Use diesel on the threads. It lubricates but the dust doesn’t stick to it.