Anyone else have this problem with there deutz?

[milton-95]

The clips in the photo are to hold the splitter gear solinoides in, and as u can see they keep breaking (4th time in 6 months) just wondering if anyone has this problem or if it's something wrong with the tractor. TIA.

 

[PaulBurrows]

My brother in law had a M625 and he had something like that breaking a lot so not sure it's just yours. Can find out if it was exactly that if you like

 

[Tractor_dealer]

It is caused by changing the power shift too quick
A accumilalater can be fitted
Pm me or speak to your dealer
It's a quick fix

 

[Jim B]

Relatively common problem. Some people break them now and again, others never have the problem. Just don't keep driving it if you break one, you should get T18 error code on the dash. Although it won't always warn you to stop, best to stop and replace the fork. If the wrong packs are in you can burn out clutch packs. Some people change these forks as part of the service, as a preventative measure.

But, as Tractor_dealer says, there is an accumulator kit that can be fitted, apparently ones that have been done haven't broken forks.

New 6 series completely different, "wormery" and the valves these forks hold in has gone and a new proportional valve chest changes the powershifts so I understand?

 

[milton-95]

Thanks for the replies . If it continues to get more frequent then I'll have to see about this accumlater valve, but I'll just keep a few spares with me all the time for now. @Jim B yeah the first time it happened error code 18 came up but hasn't come on again since just start getting a delay in the gears.