Beacons for new Holland 7840 and 8260

[Scott 6050]

I have bought beacons for my two tractors and I am wondering if I will be ok running two beacons off the original wiring and plugs in the cab? Thanks

 

[Lincsman]

Yes they have plugs in the roof for that reason.

 

[Scott 6050]

Yes, I was just worried about the power required for two beacons as my 6050 has two beacons and this melted the pins in the back of the switch panel.

 

[Lincsman]

Yes, I was just worried about the power required for two beacons as my 6050 has two beacons and this melted the pins in the back of the switch panel.

Should be relay powered not through the switch.

 

[Scott 6050]

The switch failing seems to be a common problem reading through here. I think solution is to wire a relay into the system as there is not relay as standard

 

[Ptk44]

Should be relay powered not through the switch.

Should be but earlier models were not and that’s why the switch module failed.

 

[Ptk44]

I have bought beacons for my two tractors and I am wondering if I will be ok running two beacons off the original wiring and plugs in the cab? Thanks

Sent you link on the other thread you posted.