Calibrating MF 7600 Dyna 6

[AWJ26]

Can someone tell me the procedure, I know how to do our 6400, but that method doesn't work on our 7618.

Thanks

 

[dee]

It's pretty much the same as the 6400 only difference is you have to switch of the tractor to validate the calibration when it finishes. Did you heat it up to 36 degrees before you started

 

[AWJ26]

Yes, transmission was 50 degrees, couldn't get the calibration to start.

This is what I tried

Engine @1500
Handbrake off
Clutch down
Lift shuttle lever while pressing diff lock button.

Nothing happened, on the 6400 you know it had started when the range lights were flashing between 1 and 4, how do you tell on the 7600?

 

[dee]

If it was 50 it's too warm needs to be between 36 and 46 you will see ct come up on the right screen on the dash and when it's finished calibration 1-2 will flash the same as 6400

 

[AWJ26]

Ideal, thanks. I was used to getting the 6400 as hot as possible before calibrating. Sorted now.