Can Trimble CFX 750 talk to fendt terminal?

[thebull]

hi all, we are running a TRIMBLE CFX 750 in our fendt 724 profi plus. We are about to add a iso ready spreader to the operation that will run through the fendt terminal.
Is there a way for the Trimble system to talk to the fendt terminal for auto shut off, rate control etc.

NB the reason for the second screen is multiple boom sprays running on other tractors that are not iso ready.

Thanks all.

 

[Slick]

The CFX 750 is not an ISO display so no.

 

[GPS_Support_2014]

You would only be able to output NMEA (GPS data) to the Fendt terminal. The Fendt terminal would have to do all the “talking” with the ISO implement.

 

[Northern farmer]

You would only be able to output NMEA (GPS data) to the Fendt terminal. The Fendt terminal would have to do all the “talking” with the ISO implement.

There is an NMEA interface but as far as I know, Fendt can only output NMEA, no setting to use an external source for position data?