woodylane
Member
- Location
- Lancashire
Looking for a carpet for the new tractor, I’ve looked at them previously for the old fendt but I can’t for the life of me remember where. Any ideas? Couldn’t find anything on google.
Carpet for MF7722
- Thread starter woodylane
- Start date
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/332990955096
Also got one of these.
Also got one of these.
- Location
- South wales
https://www.farmingparts.com/Mobile...t---Carpet-Material---3933673M1/m-m-5032.aspx
This is for a 76 but will fit I’ve got one in my 7718
This is for a 76 but will fit I’ve got one in my 7718
- Location
- South wales
Blimey that’s expensive
- Location
- South wales
Did you find this made the back rest part not click back into place properly or is it just mine?
Finn farmer
Member
I think that it's reasonably priced when you concider the shape and durability of one. I'd say that a Massey one from the dealer would cost anything between 120 to 200£ or even more.
- Location
- South wales
It’s more expensive than the one I linked up is more what I meant
- Location
- Pinnaroo. South Australia
And the one you linked to is from a mf dealer
farmerbill
Member
What’s the point [emoji848]
I don’t have carpets in the car let alone the tractor
I don’t have carpets in the car let alone the tractor
woodylane
Member
- Location
- Lancashire
Thanks everyone
- Location
- South wales
If your spending day in day out in there why not
Yes I just played about with straps till it clipped in better. It’s nice to be able to clean it easily so I put up with it.
My carpet gets mucked up but at least I can just pull it out a pressure wash it don’t think I would want to do the cab floor.I’ve always liked the idea, but unless your essentially only wearing shoes or clean work boots in there and not getting out in the field or in a dirty yard it’s a bit of a non starter for me.
I cut a bit of rubber to the shape of my cab and it’s dirty every time I get in or out.
https://www.esedirect.co.uk/p-2928-cobarib-wide-ribbed-rubber-matting-per-metre.aspx
I had thought of getting something along the lines of this that could be pulled out and washed. Like @ColinV6 the nature of our work always involves slurry or sticky clay so a carpet is a non runner.
I had thought of getting something along the lines of this that could be pulled out and washed. Like @ColinV6 the nature of our work always involves slurry or sticky clay so a carpet is a non runner.
- Location
- South wales
I’ve cut a piece from an old conveyor that is in there through the winter or when I’m on the muck
ollie989898
Member
You could get on ebay and buy one of those estate car boot liners for not a lot of money, then simply trim the thing in the required shape. Rubber far better than carpet as you can pressure wash it out and it is dry in moments, although not the same if you are like me and take your boots off from time to time. A carpet would be warmer, control dust better and probably deaden the noise a bit. Use a synthetic carpet (way cheaper than natural fibre) and you can even bleach stains out of it if you want. I would not want to get a carpet damp it would probably stink to high hell before long.
Could even put modern carpet underlay under it and it would be even softer and quieter then. Pennies per metre, probably an off cut from a carpet shop would do.
Could even put modern carpet underlay under it and it would be even softer and quieter then. Pennies per metre, probably an off cut from a carpet shop would do.
- Location
- South wales
That’s why those mats that I put the link up for are so good jet wash it off it dries overnight and doesn’t stink
ollie989898
Member
They good look very smart. I used to regularly take my boots off and drive in my socks if I was doing field work, better for your circulation and a carpet would be ace for that.
- Tags
- asbestos