Hello Farmers,
I want to ask for your advice. when disconnecting the cab from the Case 1056xl tractor, the relay and cables from the mfd solenoid, pressure regulating valve and pressure regulating valve switch broke off. Upon inspection, I found out that some were not even plugged in. Please, when do these solenoids turn on? especially I don't know when the pressure regulating valve works.
I know that when the 4WD switch is turned on, there will not be 12V on the MFD solenoid. With 2WD there is still voltage. When I apply the brake, I also disconnect the voltage from the MFD solenoid. this is controlled by 3 relays. How does the pressure regulating valve work please? is the pressure regulating valve switch connected to the indicator light or does it control the voltage on the valve?
well thank you
I want to ask for your advice. when disconnecting the cab from the Case 1056xl tractor, the relay and cables from the mfd solenoid, pressure regulating valve and pressure regulating valve switch broke off. Upon inspection, I found out that some were not even plugged in. Please, when do these solenoids turn on? especially I don't know when the pressure regulating valve works.
I know that when the 4WD switch is turned on, there will not be 12V on the MFD solenoid. With 2WD there is still voltage. When I apply the brake, I also disconnect the voltage from the MFD solenoid. this is controlled by 3 relays. How does the pressure regulating valve work please? is the pressure regulating valve switch connected to the indicator light or does it control the voltage on the valve?
well thank you