case 1494 top linkage pin how do you remove ?

[andybk]

noticed the very top linkage arm pin is broken off where the pick up hitch lift is attached looks like a hardened bolt through the lot , how do you get it out the lift ? seems solid is it tapered ? or threaded ? thanks

 

[Bury the Trash]

Would be better with a picture.
Not sure which you mean.

 

[andybk]

will add a couple when my phone is charged up , it looks like a bolt with hex head one side and same other side where main lift , lifts adjustable arms , absolutely solid

 

[andybk]

Try this

 

[andybk]

Try this

Aas

 

[multi power]

@Selectamatic

 

[Selectamatic]

They are a tapered bolt, parallel through the lift arm, tapering in the tractor arm, with a nut on the end.

Try turning the hex hed bolt with a 3/4ins drive socket and a piece of pipe

Try a drift and a few well aimed blows to the broken end

They can get tight, as you probably know...

 

[andybk]

They are a tapered bolt, parallel through the lift arm, tapering in the tractor arm, with a nut on the end.

Try turning the hex hed bolt with a 3/4ins drive socket and a piece of pipe

Try a drift and a few well aimed blows to the broken end

They can get tight, as you probably know...

Thank you , just wanted to know what i was dealing with before i attacked it with hammer then find it was threaded , i will douse it in wd40 for a few days let it soak in first , all the best

 

[tomlad]

3/4 gear big pipe + heat ??