Case 785 xl

Gapples

Member
17206185217216916401212221321582.jpg
Flywheel torques are on this.
I never used any torque for the clutch pressure plate bolts, just tightened by feel for the size of bolt....they are never an issue.
IF you have skimmed the Flywheel though you may have to skim the face where the bolts that hold it go.
If you don't there is a risk the clutch plate springs will catch the bolt heads.
Also if you do have to skim that area its possible the bolts will bottom out in the crankshaft and thus the Flywheel will not be tight !
Just stuff to be aware of.
 

Will you help clear snow?

  • yes

    Votes: 68 31.6%
  • no

    Votes: 147 68.4%

The London Palladium event “BPR Seminar”

  • 12,592
  • 185
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top