Case / David Brown 1394 / 1494 turbo

[spark plug]

I have acquired a 1394 but in a slip of concentration I didn’t notice until I got it back that the turbo has been removed and a N/A manifold fitted.

So I’m on the lookout for a turbo, manifold and the associated pipes and hoses to put it right.

If anyone has any or all of the bits, ideally north east area?

 

[Netherfield]

Has it been removed or has someone fitted 1390/1212/1210 engine instead, without the correct block tappings you're not going to have anywhere to get an oil supply for the turbocharger.

 

[spark plug]

I will have to make sure but it looked as though the feed and return had been blanked off.

 

[spark plug]

Has it been removed or has someone fitted 1390/1212/1210 engine instead, without the correct block tappings you're not going to have anywhere to get an oil supply for the turbocharger.

Just had a good look and the oil feed and return for the turbo has defenstly been blanked off. Looks like it’s just been a corner cutting repair.

 

[Netherfield]

Just had a good look and the oil feed and return for the turbo has defenstly been blanked off. Looks like it’s just been a corner cutting repair.

So now you don't know if the block has been used to build a non turbo engine, or for which engine the injector pump is set up for, the original V5 should have the engine number printed on it,or it's on a plate on the tractor, David Brown Tractor club could have the information archived either.

 

[spark plug]

I will check the numbers, see what I can find.