Case mx lift problem

[Herefordhop123]

Having an issue with my mx 110, when using the rocker switch for lifting on headlands when topping etc. After a period it will alter the height I've set the machine to lift up to, and will also bounce the linkage up and down like it can't find the correct height. I'm led to believe there's a lift solenoid or switch on the back end that could be faulty or dirty? Anyone point me in the right direction?


Thanks !

 

[rc mx110]

Is the switch on the right of the 4wd switch in the off position.

 

[Herefordhop123]

Yeah wheel slip is off.

 

[rc mx110]

Yeah wheel slip is off.

Hmm, this concludes my helpfulness

 

[bravheart]

Don't know tractor but it sounds like you have lift height on draught control instead of position control

 

[Chap]

Both potentiometers need checking. 1 under black cover rh side top link and the big depth wheel inside cab. Our 110 did exactly the same and the one inside the cab was fecked. Would only jump up and down very occasionally, brutal when it did