Case Puma 210

[Markotm155]

Nowthen being a blue man I'm a bit puzzled!...
We've recently bought this 2009 puma 210 3700hrs. Cheap horsepower. It has the power comand gearbox. Classic spec I.e mechanical spools, non multicontoller.
I'm wanting to calibrate the gearbox but can't work out how to get it into calibration mode. I can do the NH equivalent no troubles (hold up shift and downshift turn key.....) but does anyone know how to do the Case with it's rocker switch gear change.
Hope this makes sence!

 

[Ali_Maxxum]

If it's like our old MXU with the rocker switch gear shifter then it would be just hold upshift and turn the tractor on, revs should automatically set on that one? Then into forward and off the clutch.

 

[Markotm155]

If it's like our old MXU with the rocker switch gear shifter then it would be just hold upshift and turn the tractor on, revs should automatically set on that one? Then into forward and off the clutch.

Thanks.... tried holding up shift....nothing. tried down shift also still nothing. Any ideas anyone??

 

[youngscot]

You need to hold downshift then flick the upshift as you turn tractor on, or the other way around I can’t quite remember ?

 

[Tomr10]

So many different ways need to get hold of the manual our McCormick you need to hold accelerator down for 1 sec

 

[Tomr10]

Calibrating gearbox power command

Anyone know the correct procedure to do it ? It's not in the book , have asked dealer already who told me but I have forgotten. Can't find it on web . Thanks

thefarmingforum.co.uk

Might help


Also this on the forum

From what I remember, hold the rocker switch in downshift position, turn on the ignition and then 1 - 3 seconds later press upshift. That should get you into the calibration menu I think. Try the other way around if that doesn't work