Changing KV Tineseeder points

[Andrew K]

Is it just me or do people find replacing the standard coulter wearing point a sod of a job on these drills.Is there an easy way to access the retaining bolts or do you need a special spanner?

On a previous drill I threw the standard coulters away and fitted something different,but would prefer not to do that again if possible.

Thanks for any ideas.

 

[David.]

On the older model, the new style boot is slotted and so you take out the accessible bolt and slide the boot off the other.
Or is the new one different?

 

[Andrew K]

Not sure if different but doesnt have a definitive slot in the coulter on the 2016 model here?