Claas 300c bed

[Tomtrac]

Hi our mower claas 300 c whas hit summert and bent and split bed top and bottom any one got a mower with duff gear box but working bed
Thanks

 

[oakleaf]

The stud holding on the second v belt pulley failed on my 300c resulting in a broken stud in the shaft entering the gearbox.
As it is only the back up mower fixing it is pretty much bottom of the to do list. So l got what you want.
Problem is our locations

 

[gmc541]

The stud holding on the second v belt pulley failed on my 300c resulting in a broken stud in the shaft entering the gearbox.
As it is only the back up mower fixing it is pretty much bottom of the to do list. So l got what you want.
Problem is our locations

Location is only a problem if you want it to be,put bed on pallet/2 and it's no longer expensive to get stuff across the water

 

[Tomtrac]

The stud holding on the second v belt pulley failed on my 300c resulting in a broken stud in the shaft entering the gearbox.
As it is only the back up mower fixing it is pretty much bottom of the to do list. So l got what you want.
Problem is our locations

Any pictures and thought on price
I do like a drive out

 

[oakleaf]

Willl get you some pics next time I am near the mower. Just crazy busy on hay at the mo.

 

[Tomtrac]

Willl get you some pics next time I am near the mower. Just crazy busy on hay at the mo.

Yeh same here
At least the weather ahead is fine so slight pressure off

 

[oakleaf]

Few pics as requested

 

[Dave W]

Few pics as requested

I might have parts to mend that if it's the same gearbox I'm thinking

 

[Manney]

Few pics as requested

Ive got a complete headstock down to the pivot point that would fix that.

 

[oakleaf]

T

I might have parts to mend that if it's the same gearbox I'm thinking

Ive got a complete headstock down to the pivot point that would fix that.

Thank you both for your help but there is really no parts needed.
The vee belt pulley (gearbox end ) is held onto the input shaft with a stud. This sheared resulting in the pulley whizzing off the shaft.
The shaft and pulley and belts are all undamaged. The only damage is a sheared off stud in the input shaft. I have bought a new stud and key , just need to extract the broken stud and put it back together.
The headstock , gearbox and bed are all fine. Everything still turns by hand.
Now if the stud fails to be extracted , then more parts are going to be needed.
This was/is only the back up mower and its repair is at the bottom of a long list of jobs. I give it a squirt of penetrating oil now and then when l pass it.