I have an old rollant 44 baler with nett wrapping system. The problem is that previous owner cut the wires down and the remote also is missing.
working principle is clear but maby someone could help to find right wires to operate with baler
It’s clear that brown wire is ground and thick blank is +.
nett feeding is actuated by hydraulics with the same lever I open baling chamber. For opening I have to feed the solenoid that is located in front of baler.
working principle is clear but maby someone could help to find right wires to operate with baler
It’s clear that brown wire is ground and thick blank is +.
nett feeding is actuated by hydraulics with the same lever I open baling chamber. For opening I have to feed the solenoid that is located in front of baler.