Clik Gun
- Thread starter Jerry
- Start date
An ancient git
Member
Bite the bullet and get the right kit !!
- Location
- Mendips Somerset
which is the rigtht one ? have always used the (T)dribble bar type for click (branded clikczin) and spray type for crovect (branded crovect) does it make any difference ?
Last edited:
- Location
- South east scotland
Fan nozzle for clik
- Location
- Dumfries & Galloway
Get a Crovect/Ectofly/Vectocert copy gun. Comes with t-bar, pinstripe and fan nozzle for applying all pour on types/jobs.
Clik gun isn't anything fancy or any more 'proper' than any other gun
Clik gun isn't anything fancy or any more 'proper' than any other gun
- Location
- West Wales
Simcro 35ml gun with T bar, got 2 on the go and their excellent
- Location
- Mendips Somerset
glad im not alone thought i was using wrong nozzle ,never had a breakdown so far,
- Location
- Montgomeryshire
Clik spreads over the whole body, however you apply it. You can use a T-bar but a fan nozzle (as recommended) works just as well.
- Location
- Montgomeryshire
Pretty sure the official Clik gun is made by Symcro anyway.
- Location
- West Wales
I couldn’t screenshot from the small clik gun video as it was so short a blast.
- Location
- West Wales
The beauty of the T bar is you have 10ft range so if something is running down the race and you see a small patch of fresh poo on their side’s you can get them. Also been known to do a lamb by cornering the group in the field instead of brining 200 head in for 1 lamb with wee on it.
- Location
- Mendips Somerset
must say i do like the clickzin bottle that works upright with pipe down inside and good handle to get hold of , im now transfering the click into used bottle
have had a few occasions of loosing crovect out between bottle and cap when pipe gets stiff , twists and slightly loosens ,or pipe comes off when gets round neck of a bolting ewe with chem down your front or back .
both the click caps are far better design with air intake
have had a few occasions of loosing crovect out between bottle and cap when pipe gets stiff , twists and slightly loosens ,or pipe comes off when gets round neck of a bolting ewe with chem down your front or back .
both the click caps are far better design with air intake
Agree, was using Clikzin today on lambs and like the bottle, just the bloody Clik gun would not draw up the fluid so had to remove the pipe and invert the bottle to get it to draw.
I had that trouble last year, changed the pipe inside the bottle for another and it worked.
You got a UK source for these, just had a look and cant find them.
And yes @neilo it looks like you are right the Clik gun is a Simco
- Location
- West Wales
I get mine from my local stores, mole valley surely do them?
mine just does the standard Clik branded ones.
- Location
- West Wales
I’ll try and find the packaging for part code for you, if you can’t get it I’ll get one here and send 1 down
- Location
- N.Lincs
It's a pity you live such a long way off @Jerry 
You could nip over and get one.
We're a bit embarrassed by the amount of guns we have kicking about.......
......we get one in every box ...............
They're very good guns - fan, T-bar and pin stripe nozzles.
With all these freebees I feel a bit like @neilo and @Nithsdale Farmer all rolled into one
You could nip over and get one.We're a bit embarrassed by the amount of guns we have kicking about.......
......we get one in every box ...............
They're very good guns - fan, T-bar and pin stripe nozzles.
With all these freebees I feel a bit like @neilo and @Nithsdale Farmer all rolled into one