Clucth problem on mccormick cx 85

[Yog]

Hello.
I have a mccormick cx 85.
This tractor have a elctric clucht wiyh a shuttle ,withaut any cable.
The clucth peadal stop relasing..
Its work with sensor on the pedal.
Its also have clutch buttom on the gear handle who work fine,relase all the time.
Also if i use only the reverser shuttle without the clucth its workin fine every time.
I tried to change the sensor but it dosent work..
What could be the problem?

 

[hintonroadhero]

The clutch pedal as you call it is in reality only an inching pedal...if the de-clutch button on the gear lever and the F/R are working fine then the issue lies with the proximity switch next to the clutch pedal....you will see that it is adjustable as it works on voltage drop. suggest you get the dealer involved to set it up properly

 

[Yog]

Are u talking about that sensor?
I got new as this,i change the wire and chackd it by hand. Its dosnt solve the problem,it was the same as before.

 

[hintonroadhero]

Are u talking about that sensor?
I got new as this,i change the wire and chackd it by hand. Its dosnt solve the problem,it was the same as before.

Its not just a case of changing it.. picks up on the position of the "clutch" pedal....that's why it has slotted holes for mounting... need a multimeter to check voltage drop... dealer will advise

 

[ilhan]

I'm having a similar problem too. How did you solve the problem?

Its not just a case of changing it.. picks up on the position of the "clutch" pedal....that's why it has slotted holes for mounting... need a multimeter to check voltage drop... dealer will advise

I'm having a similar problem too. How did you solve the problem?

 

[Yog]

I didnt really solve it.
I learned how to live with it..
The sensor make the problem, probably so u need to find the point that if u push over it its causes that problem.
Try to push the clutch only until the point that hes stop the tractor and not until the end and see if its help.
U also cand adjut the sensor a bit up or down.
Dont move the sensor too much or its gonna do the opposide problem.
The tractor start moving and after few meters stop..

 

[hintonroadhero]

I didnt really solve it.
I learned how to live with it..
The sensor make the problem, probably so u need to find the point that if u push over it its causes that problem.
Try to push the clutch only until the point that hes stop the tractor and not until the end and see if its help.
U also cand adjut the sensor a bit up or down.
Dont move the sensor too much or its gonna do the opposide problem.
The tractor start moving and after few meters stop..

Did you get a dealer to set it up for you?

 

[Yog]

No. Its not new sensor.
I used the old one..
Its not working perfect but i can use it..

 

[hintonroadhero]

No. Its not new sensor.
I used the old one..
Its not working perfect but i can use it..

Just be very careful.....if that potentiometer is faultly....if you leave the tractor parked with the engine running and the handbrake not set..it might set off on its own