Clutch system db 995

[DeanB]

Does anyone have a parts diagram for the full clutch pedal system for a 1976 db 995 that shows everything from the reservoir to the slave and master cylinder because after putting in dot 4 by mistake it would seem that someone has been there before me and I'm missing some bits and pieces so I'm not sure what seals to order

 

[Selectamatic]

I doubt you would want a diagram, it's pretty simple...

The reservoir is next to the dash, which feeds the master, attached to the clutch pedal, mounted outside the cab on the front bulkhead. Follow the pipe then to the slave, under the cab, behind the cab steps.

If worst came to the worst, get a new master and slave, and blow out the lines?

 

[DeanB]

I think all I need is the seals but I'm not sure of the part numbers

 

[Selectamatic]

I think all I need is the seals but I'm not sure of the part numbers

Give Barclay Williams a call, he will know what you need.

 

[agrimax]

Can't copy and paste or take a screenshot from the CIH parts list but here's the no.s........
Master cylinder seal kit........K964572
Slave cylinder seal kit....K964573

Master cylinder....K950544
Slave cylinder....K952267

 

[DeanB]

I'll give them a call tomorrow, cheers

 

[DeanB]

What fluid should I put in the brake reservoir, dot 4 or the same lhm oil I'm putting in the clutch system

 

[agrimax]

LHM only.

 

[DeanB]

Ok cheers