Compressor air hose for Slurry Umbilical

[zyklon]

I have two yellow 19mm bore hoses with claw connectors but they suffer when they get hot when blowing out pipes at long distances especially with 5inch pipe. They tend to bust at either end but more so at the compressor end.

Just wonder what pipe you guys use or do you suffer the same problem. Is there a different type of hose you can buy?

 

[upnortheast]

Hydraulic pipes would be more robust ??

 

[zyklon]

Might actually look into that.

 

[FarmerFrank88]

Depending on the output of your compressor you might benefit from bigger hoses as that could be restricting the airflow

 

[zyklon]

Compressor is a 250cfm. I do have a bigger output valve on the compressor for bigger output.

Also what pipe size should I be looking at and do you get bigger claw connectors to suit without having to change the connector on the pump/non return valve etc?