Connor wrapper problems.

[Bigsingle]

Why when lm work the wrapper in auto it's tipping the bale of it twists the bale kinda to the side instead of a straight tip, it's just started doing this lv put more oil in the backend but doing it ever bale. It's sitting on a nice flat area. Very strange. Any ideas. I'm phoning king tomorrow. Not tried since put more oil in.

 

[Dave W]

How hard is it to push the table round by hand when it’s sat flat?
Sounds like a problem with motor.

@Mr Happy will know it there’s a check or relief valve that should hold the table in place

 

[Bigsingle]

When you go to tip bale of the table twists as it lifts up and struggling to tip bale of aswell. It was doing it abit the first day but seamed to come out of it it's self. Iv to push against it to keep it square to be able to get them wrapped.

 

[Bigsingle]

Phoned Connor today, it's the brake when it stops on tip position you can move the table this shouldn't happen.