Control box mounting rail

[Steevo]

Anyone know where I can get another rail to mount onto this control box? Is it a standard OEM item?

 

[Steevo]

Nobody? I assumed they were a standard type of fitting. Sure I've seen this before on control boxes/electronics or something like that.

@Sleepy @Storeman

EDIT: Looking at it again, a hex bolt might fit.....

 

[General-Lee]

a hex bolt

You've lost me at this point and the pic is a little hazy!

 

[Steevo]

Thanks for the reply! [emoji106]

There are rails in the control box in four places that could accept a mounting point of some sort. I wasn't sure if there was something off the shelf that could be used.

 

[KB6930]

Looks like a cup head bolt would go in.

 

[Jfp]

Can't really make sense of the picture...? [emoji51]

 

[Steevo]

Can't really make sense of the picture...? [emoji51]

Sorry, those are the only photos I have currently. Done a quick Google search, it's a Teejet 844 box, here's a photo. Can't seem to find TeeJet UK (LH Agro have stopped I think @Robt?). Wondered if there was a standard OEM part that would fit the gap properly short of using a bolt or making it up with a piece of steel which could have some play. You can see two notches in the left of the pic, there is also one above and another below (red circle above shows top one)

 

[Steevo]

Edited pic

 

[etcetra]

Tee slot nut or bolt - the type used to hold down vice on a pedestal drill.

http://www.wdsltd.co.uk/categories/63/t-nuts-and-t-bolts/

 

[Pheasant Surprise]

Standard hex bolts....see graphic with mounting bracket below....

http://www.spraysmarter.com/teejet-834-p-sprayer-controller-core-kit.html

See page 7....
http://www.teejet.com/literature_pdfs/manuals/M110_844-E_Sprayer_Control.pdf

 

[FR453R]

M6 bolts fit mines I'm sure

 

[cosmagedon]

Search for T slot bolt on eBay and pick what size/type you want.

 

[Steevo]

Perfect!! Thank you all for your help!

 

[Pheasant Surprise]

Perfect!! Thank you all for your help!

I think you must have every possible mounting solution sussed now

 

[Steevo]

I think you must have every possible mounting solution sussed now

Aimed at my RAM mount topic?

The RAMs are to fix these boxes onto the tractor. Currently has window suckers but I'm not a big fan. Also ruined them taking them off one window so rather than replace I thought RAMs were the way forward as I already use them for GPS/Drill boxes in MF. Found a cracking way to do it with RAMs on the 5150 now too.