Deutz Fahr 6215 Agrotron RCShift error codes

[CWA-2017]

Hi Guys

looking for some help with two error codes on a tier 4 Deutz 6215 Agrotron

SPN. FMI. CNT
HLHP2. 1571. 8. 22
TCU. 22. - 0

Any help greatly appreciated

 

[daveydiesel1]

Is it not still under warranty?

 

[njneer]

Hi Guys

looking for some help with two error codes on a tier 4 Deutz 6215 Agrotron

SPN. FMI. CNT
HLHP2. 1571. 8. 22
TCU. 22. - 0

Any help greatly appreciated

Steering filter switch under cab at right Hand step on top of filter housing , 2 pin plug unplug it and if code goes away it's probably the switch faulty given the low hours.
Previous 6000 range had a recall for that switch due to a faulty batch from one of the sensor suppliers I think.
22 is transmission filter switch, probably being triggered by the faulty steering filter switch as they share the same 5v supply if one switch fails internally it can corrupt and trigger alarms on other sensors on the same circuit.

 

[CWA-2017]

Steering filter switch under cab at right Hand step on top of filter housing , 2 pin plug unplug it and if code goes away it's probably the switch faulty given the low hours.
Previous 6000 range had a recall for that switch due to a faulty batch from one of the sensor suppliers I think.
22 is transmission filter switch, probably being triggered by the faulty steering filter switch as they share the same 5v supply if one switch fails internally it can corrupt and trigger alarms on other sensors on the same circuit.

Thanks for that I will check it out . I noticed when I parked up to close the field gate and jumped back in to select forward it wouldn’t select but instead on the dash it read “0a”. I had to turn the engine off and restart before it would select gear

 

[njneer]

Might just have missed the seat switch signal , default when off seat is "0"Range , power shift "a"
When you clutch when on the seat it then selects the pre selected start gear , usually Range 3 , Powershift C.