Does anyone sell 9" Fibre cement guttering?

[Red Fred]

I was looking at replacing the guttering down a 60 foot side of our covered yard. The old 1970s gutters have delaminated and begun to break up so I wondered if anyone knows of a source of replacements. Google doesn't seem to throw up any of that size any more. It is 9" diameter half round if anyone knows of a source. Thanks!

 

[briarwoodproducts]

We've got 8-inch guttering - I do not believe anyone makes 9-inch f/c guttering. What part did you measure?

 

[Red Fred]

Thanks for the reply. The old gutter is 9" internal diameter, measured across the middle of a section. My handyman measured it first and drew a diagram so I went up and checked it incase he had measured 9" external diameter,or on a joint, but he hadn't. It has welded brackets so I was hoping to just swap it over. One suggestion is to run 8"plastic down inside it and see if it fits!

 

[Barley]

Thomases do some in steel no quite sure of the dimensions but fitted our brackets it’s been very good

 

[grainboy]

Welded brackets to purlins, or welded brackets hung over purlins, ??

 

[Doing it for the kids]

Replace with metal to same form

 

[Bald n Grumpy]

Thomases do some in steel no quite sure of the dimensions but fitted our brackets it’s been very good

Think they'll make whatever size you want /need

 

[Woody j]

Thanks for the reply. The old gutter is 9" internal diameter, measured across the middle of a section. My handyman measured it first and drew a diagram so I went up and checked it incase he had measured 9" external diameter,or on a joint, but he hadn't. It has welded brackets so I was hoping to just swap it over. One suggestion is to run 8"plastic down inside it and see if it fits!

I had the same problem with a steel gutter, I put a 12 inch plastic inside it (10years ago ) no more problems so far

 

[Steevo]

Another vote for Thomas Panels and Profiles - their metal gutters can be made as a perfect replacement for fibre cement. I've used a few over the years and am very happy with them.

 

[Red Fred]

Thanks for the comments, after trying a few local fabrication companies without any luck, I phoned Thomases and they were straight on to it, and are sending a quote.