Door Barriers for grain

[Honest john]

I once found some steel lift out 6Meter door barriers at a show. Forklift removal.
It was on a steel building firms show stand.

Any one able to help please.

 

[quattro]

I use 20ft steel shutters what we use for concrete shuttering
Also use 20ft concrete precast panels either dig some grain out over top of panel or put tines underneath them and lift and let grain run out

 

[David.]

Precast panels clipped on the back of some channels up the door way will be cheap and effective.

 

[Robert K]

Bigger shed [emoji23] [emoji57]

 

[Chae1]

Farm i worked on had sleepers slid into h beam at shed door. They were slid in at a angle so could pull them out.

Downside was once you took bottom ones put you had shift a few loads till it stopped running

 

[Moggy]

Concrete panels work well in channels either side door way, we then cut a hole and insert a lift up flap bit like on back of grain trailer door,on bottom panel untill grain reduces

 

[Longneck]

I like the idea of these door barriers but how do you get the grain behind them in the first place? We don’t have any augers, elevators etc we just tailgate and push up.

 

[Chae1]

I like the idea of these door barriers but how do you get the grain behind them in the first place? We don’t have any augers, elevators etc we just tailgate and push up.

Depends on height but we just fill over top with manitou. Ours just little though.