Drill fan

[Morph]

I am changing a box drill to an Accord drill on a seed drill and am coming up against a problem with fan drive.
I am short on hydraulic capacity to drive the accord hyd fan , are there others which need less oil or does anybody know of the vaderstad type lower link mounted fan system, would that work?
TIA

 

[Vincent]

I've seen a Kuhn had fan set up with the pump driven off the pro on the harrow basically a self-contained hyd fan set up

 

[Morph]

Anyone tried a little engine driving the fan?

 

[Morph]

horsch lower link mounted fan setup?

 

[Alistair Nelson]

Anyone tried a little engine driving the fan?

A bit like below did this for a scottish customer 15 years ago worked well but sounded like an aircraft!!!!!

 

[eagleye]

had a briggs and stratton engine off lawn mower driving ours for a while until went full hydraulic, horsch do a pto hydraulic pump driving hydraulic fan on theirs which i am sure could be driven ffrom back of p/h gearbox

 

[Flat 10]

I think quite a few people used to put engines on Simba drills to power the fan as they were so heavy and hard to pull...........

 

[Power Harrow Pilot]

Neighbour has a front tank rig , put a smaller motor on and then a v belt drive geared up to pump.